PartsTable
Technical Data Sheet
Download PDF

9073046 — BEARING,BALL,AIRFRAME

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

9073046: BEARING,BALL,AIRFRAME.

The BEARING,BALL,AIRFRAME is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_diameter: 2.0622 INCHES MINIMUM AND 2.0628 INCHES MAXIMUM IN, overall_width: 0.5520 INCHES MINIMUM AND 0.5620 INCHES MAXIMUM IN, load_direction: RADIAL, style_designator: SHOULDERED INNER RING, NON-SEPARABLE, FACE TO FACE MOUNTING, overall_outside_diameter: 2.6244 INCHES MINIMUM AND 2.6250 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-647-3293, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
9073046
NSN: 3110-00-647-3293
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 18876 — US ARMY AVIATION AND MISSILE COMMAND (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_diameter2.0622 INCHES MINIMUM AND 2.0628 INCHES MAXIMUM IN
overall_width0.5520 INCHES MINIMUM AND 0.5620 INCHES MAXIMUM IN
load_directionRADIAL
special_features2 BEARINGS DUPLEX MOUNTED WITH OUTER RING SPACER,VERTEX ANGLE OUTSIDE,OUTER RACES SCORED AND FRACTURED,UNDERSIZE BALLS SEPERATE LOAD CARRYING BALLS WITH STEEL HOLDING RINGS
style_designatorSHOULDERED INNER RING, NON-SEPARABLE, FACE TO FACE MOUNTING
overall_outside_diameter2.6244 INCHES MINIMUM AND 2.6250 INCHES MAXIMUM IN
lubrication_material_document_and_classificationMIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
NSN3110-00-647-3293
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 9073046 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: SHOULDERED INNER RING, NON-SEPARABLE, FACE TO FACE MOUNTING
•
OVERALL OUTSIDE DIAMETER: 2.6244 INCHES MINIMUM AND 2.6250 INCHES MAXIMUM IN
•
LOAD DIRECTION: RADIAL
•
BORE DIAMETER: 2.0622 INCHES MINIMUM AND 2.0628 INCHES MAXIMUM IN
•
MATERIAL: STEEL OVERALL
•
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORSHOULDERED INNER RING, NON-SEPARABLE, FACE TO FACE MOUNTING
OVERALL WIDTH0.5520 INCHES MINIMUM AND 0.5620 INCHES MAXIMUM IN
OVERALL OUTSIDE DIAMETER2.6244 INCHES MINIMUM AND 2.6250 INCHES MAXIMUM IN
LOAD DIRECTIONRADIAL
SPECIAL FEATURES2 BEARINGS DUPLEX MOUNTED WITH OUTER RING SPACER,VERTEX ANGLE OUTSIDE,OUTER RACES SCORED AND FRACTURED,UNDERSIZE BALLS SEPERATE LOAD CARRYING BALLS WITH STEEL HOLDING RINGS
BORE DIAMETER2.0622 INCHES MINIMUM AND 2.0628 INCHES MAXIMUM IN
MATERIALSTEEL OVERALL
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
OTHER ITEMS IN FSC 3110 — Bearings, Antifriction, Unmounted
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3110-00-001-1937 3110-00-001-1938 3110-00-001-4661 3110-00-001-4662 3110-00-001-4689 3110-00-001-4722
SUBSTITUTES & CROSS-REFERENCES 1
302-1125G1ISSUE3Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 9073046?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9073046?
9073046 is a BEARING,BALL,AIRFRAME.
What parts can replace 9073046?
There is 1 known substitute for 9073046: 302-1125G1ISSUE3. Substitute compatibility should be verified for your specific system.
What is the NSN for 9073046?
9073046 is cataloged in the U.S. Government catalog under NSN 3110-00-647-3293. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9073046