PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 907271
907271 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_shape: STRAIGHT, bore_diameter: 35.00 MILLIMETERS NOMINAL MM, overall_width: 21.0 MILLIMETERS NOMINAL MM, load_direction: RADIAL, surface_finish: GROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-991-2425, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
907271
NSN: 3110-00-991-2425
FSC: 3110
CAGE: 43334 — GENERAL MOTORS CORP DELCO MORAINE NDH DIV (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_shapeSTRAIGHT
bore_diameter35.00 MILLIMETERS NOMINAL MM
overall_width21.0 MILLIMETERS NOMINAL MM
load_directionRADIAL
surface_finishGROUND
special_featuresINTERNAL CLEARANCE MEASURED UNDER 15 LB GAGE LOAD LBS
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
features_providedSNAP RING-GROOVE MOUNTING AND MOUNTING GROOVE
internal_clearance0.0100 INCHES MINIMUM AXIAL AND 0.0120 INCHES MAXIMUM AXIAL IN
overall_outside_diameter80.00 MILLIMETERS NOMINAL MM
retainer_fabrication_methodPRESSED
NSN3110-00-991-2425
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 907271 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: PRESSED
•
FEATURES PROVIDED: SNAP RING-GROOVE MOUNTING AND MOUNTING GROOVE
•
MATERIAL: STEEL OVERALL
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
•
BORE DIAMETER: 35.00 MILLIMETERS NOMINAL MM
•
LOAD DIRECTION: RADIAL
•
OVERALL OUTSIDE DIAMETER: 80.00 MILLIMETERS NOMINAL MM
TECHNICAL CHARACTERISTICS (FLIS)
RETAINER FABRICATION METHODPRESSED
FEATURES PROVIDEDSNAP RING-GROOVE MOUNTING AND MOUNTING GROOVE
MATERIALSTEEL OVERALL
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
BORE DIAMETER35.00 MILLIMETERS NOMINAL MM
SPECIAL FEATURESINTERNAL CLEARANCE MEASURED UNDER 15 LB GAGE LOAD LBS
LOAD DIRECTIONRADIAL
OVERALL OUTSIDE DIAMETER80.00 MILLIMETERS NOMINAL MM
BORE SHAPESTRAIGHT
INTERNAL CLEARANCE0.0100 INCHES MINIMUM AXIAL AND 0.0120 INCHES MAXIMUM AXIAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
907-247Interchangeable
interchangeable cross-reference
interchangeable
50-157111JAXInterchangeable
interchangeable cross-reference
interchangeable
50-157111KDKD1JAXInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 907271?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 907271?
907271 is a BEARING,BALL,ANNULAR.
What parts can replace 907271?
There are 3 known substitutes for 907271: 907-247, 50-157111JAX, 50-157111KDKD1JAX. Substitute compatibility should be verified for your specific system.
What is the NSN for 907271?
907271 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-991-2425. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 907271

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026