PartsTable
Technical Data Sheet
Download PDF

9072300 — 9072300

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

9072300: 9072300.

The 9072300 is a the manufacturer industrial component. Key specifications include material: STEEL COMP 302 OVERALL, nut_style: SPLINE, nut_height: 0.252 INCHES NOMINAL IN, nut_diameter: 0.375 INCHES NOMINAL IN, pilot_length: 0.125 INCHES NOMINAL IN, thread_class: 2B. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-826-3600, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
9072300
NSN: 5310-00-826-3600
NIINs: 008263600, 013037009
FSC: 5310 — Nuts and Washers
CAGE: 18876 — US ARMY AVIATION AND MISSILE COMMAND (USA)
SPECIFICATIONS
materialSTEEL COMP 302 OVERALL
nut_styleSPLINE
nut_height0.252 INCHES NOMINAL IN
nut_diameter0.375 INCHES NOMINAL IN
pilot_length0.125 INCHES NOMINAL IN
thread_class2B
thread_seriesUNIFIED NATIONAL COARSE (UNC)
pilot_diameter0.278 INCHES MINIMUM AND 0.282 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
surface_treatmentPASSIVATE OVERALL
nominal_thread_size0.190 INCHES IN
counterbore_diameter0.228 INCHES NOMINAL NUT IN
NSN5310-00-826-3600
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 9072300 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763,COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
NUT COUNTERBORE DEPTH: 0.078 INCHES NOMINAL NUT IN
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.190 INCHES IN
•
NUT DIAMETER: 0.375 INCHES NOMINAL IN
•
COUNTERBORE DIAMETER: 0.228 INCHES NOMINAL NUT IN
•
PILOT DIAMETER: 0.278 INCHES MINIMUM AND 0.282 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-763,COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NUT COUNTERBORE DEPTH0.078 INCHES NOMINAL NUT IN
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.190 INCHES IN
NUT DIAMETER0.375 INCHES NOMINAL IN
COUNTERBORE DIAMETER0.228 INCHES NOMINAL NUT IN
PILOT DIAMETER0.278 INCHES MINIMUM AND 0.282 INCHES MAXIMUM IN
PILOT LENGTH0.125 INCHES NOMINAL IN
NUT HEIGHT0.252 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 1
364-1001P14Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 9072300?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9072300?
9072300 is a 9072300.
What parts can replace 9072300?
There is 1 known substitute for 9072300: 364-1001P14. Substitute compatibility should be verified for your specific system.
What is the NSN for 9072300?
9072300 is cataloged in the U.S. Government catalog under NSN 5310-00-826-3600. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9072300

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.