PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 9071976
9071976 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PIN,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL COMP 303 OVERALL, surface_finish: 10.0 MICROINCHES OVERALL, first_end_style: CHAMFERED, surface_treatment: PASSIVATE OVERALL, pin_overall_length: 1.490 INCHES MINIMUM AND 1.510 INCHES MAXIMUM IN, pin_overall_diameter: 0.1245 INCHES MINIMUM AND 0.1247 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-655-7988, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
9071976
NSN: 5315-00-655-7988
FSC: 5315
CAGE: 18876 — US ARMY AVIATION AND MISSILE COMMAND (USA)
SPECIFICATIONS
materialSTEEL COMP 303 OVERALL
surface_finish10.0 MICROINCHES OVERALL
first_end_styleCHAMFERED
surface_treatmentPASSIVATE OVERALL
pin_overall_length1.490 INCHES MINIMUM AND 1.510 INCHES MAXIMUM IN
pin_overall_diameter0.1245 INCHES MINIMUM AND 0.1247 INCHES MAXIMUM IN
first_end_taper_angle44.5 DEGREES MINIMUM AND 45.5 DEGREES MAXIMUM
first_end_taper_length0.005 INCHES MINIMUM AND 0.015 INCHES MAXIMUM IN
material_document_and_classificationAISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
second_end_relationship_with_first_endIDENTICAL
NSN5315-00-655-7988
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 9071976 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DOCUMENT AND CLASSIFICATION: AISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
SURFACE TREATMENT: PASSIVATE OVERALL
•
MATERIAL: STEEL COMP 303 OVERALL
•
PIN OVERALL LENGTH: 1.490 INCHES MINIMUM AND 1.510 INCHES MAXIMUM IN
•
FIRST END STYLE: CHAMFERED
•
FIRST END TAPER ANGLE: 44.5 DEGREES MINIMUM AND 45.5 DEGREES MAXIMUM
•
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
•
PIN OVERALL DIAMETER: 0.1245 INCHES MINIMUM AND 0.1247 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL DOCUMENT AND CLASSIFICATIONAISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
SURFACE TREATMENTPASSIVATE OVERALL
MATERIALSTEEL COMP 303 OVERALL
PIN OVERALL LENGTH1.490 INCHES MINIMUM AND 1.510 INCHES MAXIMUM IN
FIRST END STYLECHAMFERED
FIRST END TAPER ANGLE44.5 DEGREES MINIMUM AND 45.5 DEGREES MAXIMUM
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
PIN OVERALL DIAMETER0.1245 INCHES MINIMUM AND 0.1247 INCHES MAXIMUM IN
FIRST END TAPER LENGTH0.005 INCHES MINIMUM AND 0.015 INCHES MAXIMUM IN
SURFACE FINISH10.0 MICROINCHES OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
A335-10Interchangeable
interchangeable cross-reference
interchangeable
05-652006Interchangeable
interchangeable cross-reference
interchangeable
A115Interchangeable
interchangeable cross-reference
interchangeable
1456-314Interchangeable
interchangeable cross-reference
interchangeable
114872Interchangeable
interchangeable cross-reference
interchangeable
11487200Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 9071976?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9071976?
9071976 is a PIN,STRAIGHT,HEADLESS.
What parts can replace 9071976?
There are 9 known substitutes for 9071976: A335-10, 05-652006, A115 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 9071976?
9071976 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-655-7988. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9071976

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026