PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 907144
907144 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include movement_type: MOVING COIL, PERMANENT MAGNET, movement_suspension_method: JEWEL PIVOT BASE, circuit_current_for_which_designed: DC. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-902-4313, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
907144
NSN: 3110-00-902-4313
FSC: 3110
CAGE: 24617 — GENERAL MOTORS CORP (USA)
SPECIFICATIONS
movement_typeMOVING COIL, PERMANENT MAGNET
movement_suspension_methodJEWEL PIVOT BASE
circuit_current_for_which_designedDC
NSN3110-00-902-4313
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 907144 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: PRESSED
•
STYLE DESIGNATOR: LOADING GROOVE, NON-SEPARABLE
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
BORE DIAMETER: 60.00 MILLIMETERS NOMINAL MM
•
OVERALL OUTSIDE DIAMETER: 130.00 MILLIMETERS NOMINAL MM
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
RETAINER FABRICATION METHODPRESSED
OVERALL WIDTH31.0 MILLIMETERS NOMINAL MM
STYLE DESIGNATORLOADING GROOVE, NON-SEPARABLE
INTERNAL FIT-UP DESIGNATIONSTANDARD
BORE DIAMETER60.00 MILLIMETERS NOMINAL MM
OVERALL OUTSIDE DIAMETER130.00 MILLIMETERS NOMINAL MM
STANDARD TOLERANCE DESIGNATIONABEC NO.1
MATERIALSTEEL OVERALL
BORE SHAPESTRAIGHT
FEATURES PROVIDEDSNAP RING-GROOVE MOUNTING AND MOUNTING GROOVE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
9073Interchangeable
interchangeable cross-reference
interchangeable
485-0482-00Interchangeable
interchangeable cross-reference
interchangeable
9071-044Interchangeable
interchangeable cross-reference
interchangeable
41312AX1AInterchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 907144?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 907144?
907144 is a BEARING,BALL,ANNULAR.
What parts can replace 907144?
There are 4 known substitutes for 907144: 9073, 485-0482-00, 9071-044 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 907144?
907144 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-902-4313. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 907144

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026