PartsTable
Technical Data Sheet
Download PDF

906F054PC17 — O-RING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

906F054PC17: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER ETHYLENE-PROPYLENE CLASS EPM, temp_rating: -70.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF, hardness_rating: 75.0 SHORE DUROMETER A MINIMUM AND 85.0 SHORE DUROMETER A MAXIMUM, center_hole_diameter: 6.694 INCHES MINIMUM AND 6.774 INCHES MAXIMUM IN, cross-sectional_height: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN, material_document_and_classification: ASTM D2000 -2AA810A13EA14F17 ASSN STD SINGLE MATERIAL RESPONSE. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-419-6392, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
906F054PC17
NSN: 5330-00-419-6392
NIINs: 004196392, 013827040
FSC: 5330 — Packing and Gasket Materials
CAGE: 59042 — CBS BROADCASTING INC. DBA CBS DIV BECHTEL PLANT MACHINERY INC. - PITTSBURGH (USA)
SPECIFICATIONS
materialRUBBER ETHYLENE-PROPYLENE CLASS EPM
temp_rating-70.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
hardness_rating75.0 SHORE DUROMETER A MINIMUM AND 85.0 SHORE DUROMETER A MAXIMUM
center_hole_diameter6.694 INCHES MINIMUM AND 6.774 INCHES MAXIMUM IN
cross-sectional_height0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
material_document_and_classificationASTM D2000 -2AA810A13EA14F17 ASSN STD SINGLE MATERIAL RESPONSE
NSN5330-00-419-6392
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 906F054PC17 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
TECHNICAL CHARACTERISTICS
SPECIAL FEATURESREADY FOR TRANSFER; J6R; 02-23-2010.
SUBSTITUTES & CROSS-REFERENCES 2
2-261C557-70Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
C0557 2-261Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Shelf-life managedAcquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 906F054PC17?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 906F054PC17?
906F054PC17 is a O-RING.
What parts can replace 906F054PC17?
There are 2 known substitutes for 906F054PC17: 2-261C557-70, C0557 2-261. Substitute compatibility should be verified for your specific system.
What is the NSN for 906F054PC17?
906F054PC17 is cataloged in the U.S. Government catalog under NSN 5330-00-419-6392. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 906F054PC17

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.