PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 9065-13
9065-13 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

FEEDER,CHEMICAL SOLUTION,WATER P. Key specifications include general_characteristics_item_description: STAINLESS STEEL BODY,BRASS FITTINGS; 5.5 GPM FLOW RATE. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-269-3206, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
9065-13
NSN: 5305-00-269-3206
FSC: 5305
CAGE: F6101 — SAFRAN AEROSYSTEMS (FRA)
SPECIFICATIONS
general_characteristics_item_descriptionSTAINLESS STEEL BODY,BRASS FITTINGS; 5.5 GPM FLOW RATE
NSN5305-00-269-3206
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 9065-13 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MINIMUM YIELD STRENGTH: 85000 POUNDS PER SQUARE INCH LBS
•
MATERIAL: STEEL OVERALL
•
HARDNESS RATING: 23.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE GR 5 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL COARSE (UNC)
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: SAE/AMS QQ-P-416 TY2CL3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
•
THREAD LENGTH: 0.313 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MINIMUM YIELD STRENGTH85000 POUNDS PER SQUARE INCH LBS
MATERIALSTEEL OVERALL
HARDNESS RATING23.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONSAE GR 5 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONSAE/AMS QQ-P-416 TY2CL3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
THREAD LENGTH0.313 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.375 INCHES IN
MINIMUM TENSILE STRENGTH120000 POUNDS PER SQUARE INCH LBS
VERIFIED SUBSTITUTES & CROSS-REFERENCES 28
D225K25KInterchangeable
interchangeable cross-reference
interchangeable
1368Interchangeable
interchangeable cross-reference
interchangeable
3-4TA51FS30Interchangeable
interchangeable cross-reference
interchangeable
F10J30RInterchangeable
interchangeable cross-reference
interchangeable
F109Interchangeable
interchangeable cross-reference
interchangeable
2004Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 9065-13?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9065-13?
9065-13 is a FEEDER,CHEMICAL SOLUTION,WATER P.
What parts can replace 9065-13?
There are 28 known substitutes for 9065-13: D225K25K, 1368, 3-4TA51FS30 and 25 more. Substitute compatibility should be verified for your specific system.
Is 9065-13 still available?
9065-13 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9065-13

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026