PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 9064-05
9064-05 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

FEEDER,CHEMICAL SOLUTION,WATER P. Key specifications include end_item_identification: BROMINATING FEEDER, general_characteristics_item_description: 15 GPM CAPACITY,RECIRC,NONMAGNETIC,SOL VALVE CONTROLLED,115 VAC,60 HZ,1.5 AMPS,1 PHASE VAC. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-021-8408, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
9064-05
NSN: 5310-00-021-8408
FSC: 5310
CAGE: 92392 — ALLIS-CHALMERS CORP (USA)
SPECIFICATIONS
end_item_identificationBROMINATING FEEDER
general_characteristics_item_description15 GPM CAPACITY,RECIRC,NONMAGNETIC,SOL VALVE CONTROLLED,115 VAC,60 HZ,1.5 AMPS,1 PHASE VAC
NSN5310-00-021-8408
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 9064-05 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD DIRECTION: RIGHT-HAND
•
THREAD QUANTITY PER INCH: 12
•
NUT HEIGHT: 1.063 INCHES NOMINAL IN
•
NOMINAL THREAD SIZE: 1.250 INCHES IN
•
BEARING SURFACE TYPE: WASHER FACED
•
THREAD SERIES: UNF
•
WIDTH ACROSS FLATS: 1.875 INCHES NOMINAL IN
•
NUT STYLE: HEXAGON
TECHNICAL CHARACTERISTICS (FLIS)
THREAD DIRECTIONRIGHT-HAND
THREAD QUANTITY PER INCH12
NUT HEIGHT1.063 INCHES NOMINAL IN
NOMINAL THREAD SIZE1.250 INCHES IN
BEARING SURFACE TYPEWASHER FACED
THREAD SERIESUNF
WIDTH ACROSS FLATS1.875 INCHES NOMINAL IN
NUT STYLEHEXAGON
THREAD CLASS2B
MATERIALSTEEL OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
218408Interchangeable
interchangeable cross-reference
interchangeable
SSFM-100BCInterchangeable
interchangeable cross-reference
interchangeable
SSFM-100BC-15GPMInterchangeable
interchangeable cross-reference
interchangeable
3057-43Interchangeable
interchangeable cross-reference
interchangeable
9903-005300-001Interchangeable
interchangeable cross-reference
interchangeable
N38311Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 9064-05?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9064-05?
9064-05 is a FEEDER,CHEMICAL SOLUTION,WATER P.
What parts can replace 9064-05?
There are 11 known substitutes for 9064-05: 218408, SSFM-100BC, SSFM-100BC-15GPM and 8 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 9064-05?
9064-05 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-021-8408. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9064-05

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026