PartsTable
Technical Data Sheet
Download PDF

9063858 — STRAP,RETAINING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

9063858: STRAP,RETAINING.

The STRAP,RETAINING is a the manufacturer industrial component. Key specifications include cushion: NOT INCLUDED, mounting_pad: NOT INCLUDED, overall_width: 1.000 INCHES NOMINAL IN, overall_length: 2.340 INCHES NOMINAL IN, style_designator: CURVED ARCH, surface_treatment: CADMIUM. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-619-0176, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
9063858
NSN: 5340-00-619-0176
FSC: 5340 — Hardware, Commercial
CAGE: 18876 — US ARMY AVIATION AND MISSILE COMMAND (USA)
SPECIFICATIONS
cushionNOT INCLUDED
materialSTEEL COMP 1017 OR STEEL COMP 1015 OR STEEL COMP 1012 OR STEEL COMP 1010 OR STEEL COMP 1009 OR STEEL COMP 1008 OR STEEL COMP 1006 LOCATION NOT OTHERWISE SPECIFIED
mounting_padNOT INCLUDED
overall_width1.000 INCHES NOMINAL IN
overall_length2.340 INCHES NOMINAL IN
style_designatorCURVED ARCH
surface_treatmentCADMIUM
material_thickness0.090 INCHES NOMINAL IN
mounting_hole_size0.390 INCHES NOMINAL IN
inside_diameter/arch_length1.250 INCHES NOMINAL IN
distance_between_base_and_inside_of_arch1.188 INCHES NOMINAL IN
center_to_center_distance_between_arch_and_mounting_hole1.250 INCHES NOMINAL IN
NSN5340-00-619-0176
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 9063858 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING HOLE SIZE: 0.390 INCHES NOMINAL IN
•
MOUNTING PAD: NOT INCLUDED
•
STYLE DESIGNATOR: CURVED ARCH
•
MATERIAL THICKNESS: 0.090 INCHES NOMINAL IN
•
CUSHION: NOT INCLUDED
•
DISTANCE BETWEEN BASE AND INSIDE OF ARCH: 1.188 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
MOUNTING HOLE SIZE0.390 INCHES NOMINAL IN
MOUNTING PADNOT INCLUDED
STYLE DESIGNATORCURVED ARCH
OVERALL LENGTH2.340 INCHES NOMINAL IN
OVERALL WIDTH1.000 INCHES NOMINAL IN
MATERIAL THICKNESS0.090 INCHES NOMINAL IN
CUSHIONNOT INCLUDED
DISTANCE BETWEEN BASE AND INSIDE OF ARCH1.188 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM
MATERIALSTEEL COMP 1017 OR STEEL COMP 1015 OR STEEL COMP 1012 OR STEEL COMP 1010 OR STEEL COMP 1009 OR STEEL COMP 1008 OR STEEL COMP 1006 LOCATION NOT OTHERWISE SPECIFIED
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 9063858?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9063858?
9063858 is a STRAP,RETAINING.
What is the NSN for 9063858?
9063858 is cataloged in the U.S. Government catalog under NSN 5340-00-619-0176. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9063858