PartsTable
Technical Data Sheet
Download PDF

906185 — CLIP,SPRING TENSION

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

906185: CLIP,SPRING TENSION.

The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 0.760 INCHES NOMINAL IN, length: 2.198 INCHES NOMINAL IN, material: STEEL COMP 1566 OR STEEL COMP 1095 OVERALL, slot_width: 0.252 INCHES MINIMUM AND 0.254 INCHES MAXIMUM IN, slot_length: 0.313 INCHES MINIMUM AND 0.315 INCHES MAXIMUM IN, overall_height: 1.009 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-698-4387, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
906185
NSN: 5340-00-698-4387
FSC: 5340 — Hardware, Commercial
CAGE: 24617 — GENERAL MOTORS CORP (USA)
SPECIFICATIONS
width0.760 INCHES NOMINAL IN
length2.198 INCHES NOMINAL IN
materialSTEEL COMP 1566 OR STEEL COMP 1095 OVERALL
slot_width0.252 INCHES MINIMUM AND 0.254 INCHES MAXIMUM IN
slot_length0.313 INCHES MINIMUM AND 0.315 INCHES MAXIMUM IN
overall_height1.009 INCHES NOMINAL IN
material_thickness0.049 INCHES NOMINAL IN
material_document_and_classificationAISI C1066 ASSN STD 1ST MATERIAL RESPONSE OR AISI ASSN STD 2ND MATERIAL RESPONSE OVERALL
NSN5340-00-698-4387
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 906185 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 2.198 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AISI C1066 ASSN STD 1ST MATERIAL RESPONSE OR AISI ASSN STD 2ND MATERIAL RESPONSE OVERALL
•
MATERIAL THICKNESS: 0.049 INCHES NOMINAL IN
•
WIDTH: 0.760 INCHES NOMINAL IN
•
MATERIAL: STEEL COMP 1566 OR STEEL COMP 1095 OVERALL
•
SLOT WIDTH: 0.252 INCHES MINIMUM AND 0.254 INCHES MAXIMUM IN
•
SLOT LENGTH: 0.313 INCHES MINIMUM AND 0.315 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT1.009 INCHES NOMINAL IN
LENGTH2.198 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONAISI C1066 ASSN STD 1ST MATERIAL RESPONSE OR AISI ASSN STD 2ND MATERIAL RESPONSE OVERALL
MATERIAL THICKNESS0.049 INCHES NOMINAL IN
WIDTH0.760 INCHES NOMINAL IN
MATERIALSTEEL COMP 1566 OR STEEL COMP 1095 OVERALL
SLOT WIDTH0.252 INCHES MINIMUM AND 0.254 INCHES MAXIMUM IN
SLOT LENGTH0.313 INCHES MINIMUM AND 0.315 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Semi-active item — no replacement plannedNo demilitarization required
Ready to buy 906185?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 906185?
906185 is a CLIP,SPRING TENSION.
What is the NSN for 906185?
906185 is cataloged in the U.S. Government catalog under NSN 5340-00-698-4387. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 906185

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.