PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 905D
905D ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The WASHER,FINISHING is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY OVERALL, hole_diameter: 0.199 INCHES NOMINAL IN, overall_height: 0.188 INCHES NOMINAL IN, recess_diameter: 0.592 INCHES NOMINAL IN, outside_diameter: 1.125 INCHES NOMINAL IN, style_designator: FINISHING. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-596-1721, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
905D
NSN: 5310-00-596-1721
FSC: 5310
CAGE: 63743 — WARD LEONARD CT LLC (USA)
SPECIFICATIONS
materialCOPPER ALLOY OVERALL
hole_diameter0.199 INCHES NOMINAL IN
overall_height0.188 INCHES NOMINAL IN
recess_diameter0.592 INCHES NOMINAL IN
outside_diameter1.125 INCHES NOMINAL IN
style_designatorFINISHING
surface_treatmentZINC AND CHROMATE OVERALL
material_thickness0.032 INCHES NOMINAL IN
NSN5310-00-596-1721
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 905D · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HOLE DIAMETER: 0.199 INCHES NOMINAL IN
•
MATERIAL: COPPER ALLOY OVERALL
•
STYLE DESIGNATOR: FINISHING
•
SURFACE TREATMENT: ZINC AND CHROMATE OVERALL
•
RECESS DIAMETER: 0.592 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 1.125 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.032 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
HOLE DIAMETER0.199 INCHES NOMINAL IN
MATERIALCOPPER ALLOY OVERALL
STYLE DESIGNATORFINISHING
SURFACE TREATMENTZINC AND CHROMATE OVERALL
RECESS DIAMETER0.592 INCHES NOMINAL IN
OVERALL HEIGHT0.188 INCHES NOMINAL IN
OUTSIDE DIAMETER1.125 INCHES NOMINAL IN
MATERIAL THICKNESS0.032 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
250C9Interchangeable
interchangeable cross-reference
interchangeable
DT25009Interchangeable
interchangeable cross-reference
interchangeable
CA-295Interchangeable
interchangeable cross-reference
interchangeable
B4Q6563AInterchangeable
interchangeable cross-reference
interchangeable
42009Interchangeable
interchangeable cross-reference
interchangeable
8488718Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 905D?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 905D?
905D is a WASHER,FINISHING.
What parts can replace 905D?
There are 14 known substitutes for 905D: 250C9, DT25009, CA-295 and 11 more. Substitute compatibility should be verified for your specific system.
Is 905D still available?
905D is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 905D

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026