PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 9059-5
9059-5 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CATCH,FLUSH is a the manufacturer industrial component. Key specifications include diameter: 0.204 INCHES NOMINAL IN, material: PLASTIC POLYTETRAFLUOROETHYLENE CUSHION, overall_width: 0.500 INCHES NOMINAL IN, style_designator: OFFSET MOUNT, tongue_hole_type: ROUND, UNTHREADED, surface_treatment: PASSIVATE BAND. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-072-8315, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
9059-5
NSN: 5340-00-072-8315
FSC: 5340
CAGE: 84276 — JELLIFF CORPORATION DBA JELLIFF (USA)
SPECIFICATIONS
diameter0.204 INCHES NOMINAL IN
materialPLASTIC POLYTETRAFLUOROETHYLENE CUSHION
overall_width0.500 INCHES NOMINAL IN
style_designatorOFFSET MOUNT
tongue_hole_typeROUND, UNTHREADED
surface_treatmentPASSIVATE BAND
material_thickness0.032 INCHES NOMINAL IN
loop_inside_diameter0.625 INCHES NOMINAL IN
specification/standard_data80205-NAS1715 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
material_document_and_classificationAMS 3651 ASSN STD SINGLE MATERIAL RESPONSE CUSHION
distance_from_loop_center_to_tongue_end0.9185 INCHES MINIMUM AND 0.9485 INCHES MAXIMUM IN
surface_treatment_document_and_classificationQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE BAND
NSN5340-00-072-8315
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 9059-5 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 4.775 INCHES NOMINAL IN
•
STYLE DESIGNATOR: FLUSH LEVER ACTUATOR
•
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH: 1.360 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH: 1.500 INCHES NOMINAL IN
•
WIDTH: 2.140 INCHES NOMINAL IN
•
BOLT OFFSET DISTANCE: 0.132 INCHES NOMINAL IN
•
MOUNTING HOLE DIAMETER: 0.159 INCHES NOMINAL IN
•
MATERIAL: UNABLE TO DECODE
TECHNICAL CHARACTERISTICS (FLIS)
LENGTH4.775 INCHES NOMINAL IN
STYLE DESIGNATORFLUSH LEVER ACTUATOR
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH1.360 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH1.500 INCHES NOMINAL IN
WIDTH2.140 INCHES NOMINAL IN
BOLT OFFSET DISTANCE0.132 INCHES NOMINAL IN
MOUNTING HOLE DIAMETER0.159 INCHES NOMINAL IN
MATERIALUNABLE TO DECODE
FEATURES PROVIDEDBOLT
LEVER OFFSET DISTANCE0.032 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
MS19059-2422Interchangeable
interchangeable cross-reference
interchangeable
A9314Interchangeable
interchangeable cross-reference
interchangeable
H-28450 PIECE 1Interchangeable
interchangeable cross-reference
interchangeable
ND6282PC69Interchangeable
interchangeable cross-reference
interchangeable
69ND6282Interchangeable
interchangeable cross-reference
interchangeable
NAS1715C10KInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 9059-5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9059-5?
9059-5 is a CATCH,FLUSH.
What parts can replace 9059-5?
There are 11 known substitutes for 9059-5: MS19059-2422, A9314, H-28450 PIECE 1 and 8 more. Substitute compatibility should be verified for your specific system.
Is 9059-5 still available?
9059-5 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9059-5

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026