PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 9057-6
9057-6 ✓ Verified by PartsTable
Hot Wheels · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

Two vehicles in one, with music and lights for each side. Motorized vehicle speeds to the finish line, flips over and keeps racing!. Key specifications include material: STEEL OVERALL, nut_style: HEXAGON, nut_height: 0.121 INCHES NOMINAL IN, thread_class: 2B, thread_series: UNIFIED NATIONAL COARSE (UNC), thread_direction: RIGHT-HAND.

This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-01-017-3830, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
9057-6
NSN: 5310-01-017-3830
FSC: 5310
CAGE: 08645 — BRIGGS AND STRATTON CORP (USA)
SPECIFICATIONS
materialSTEEL OVERALL
nut_styleHEXAGON
nut_height0.121 INCHES NOMINAL IN
thread_class2B
thread_seriesUNIFIED NATIONAL COARSE (UNC)
thread_directionRIGHT-HAND
surface_treatmentCADMIUM OVERALL
width_across_flats0.337 INCHES NOMINAL IN
nominal_thread_size0.164 INCHES IN
bearing_surface_typeWASHER FACED
thread_quantity_per_inch32
NSN5310-01-017-3830
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 9057-6 · Hot Wheels ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT: CADMIUM OVERALL
•
THREAD QUANTITY PER INCH: 32
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
NOMINAL THREAD SIZE: 0.164 INCHES IN
•
BEARING SURFACE TYPE: WASHER FACED
•
MATERIAL: STEEL OVERALL
•
THREAD DIRECTION: RIGHT-HAND
•
NUT STYLE: HEXAGON
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE TREATMENTCADMIUM OVERALL
THREAD QUANTITY PER INCH32
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
NOMINAL THREAD SIZE0.164 INCHES IN
BEARING SURFACE TYPEWASHER FACED
MATERIALSTEEL OVERALL
THREAD DIRECTIONRIGHT-HAND
NUT STYLEHEXAGON
THREAD CLASS2B
NUT HEIGHT0.121 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 2
9057-6Interchangeable
interchangeable cross-reference
interchangeable
9068-1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 9057-6?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9057-6?
9057-6 is a SEAL SPECIAL manufactured by Hot Wheels.
What parts can replace 9057-6?
There are 2 known substitutes for 9057-6: 9057-6, 9068-1. Substitute compatibility should be verified for your specific system.
What is the NSN for 9057-6?
9057-6 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-01-017-3830. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9057-6

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026