PartsTable
Technical Data Sheet
Download PDF

9055735 — WASHER,FLAT

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

9055735: WASHER,FLAT.

The WASHER,FLAT is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, thickness: 0.020 INCHES MINIMUM AND 0.030 INCHES MAXIMUM IN, hole_diameter: 0.114 INCHES MINIMUM AND 0.124 INCHES MAXIMUM IN, overall_diameter: 0.276 INCHES MINIMUM AND 0.286 INCHES MAXIMUM IN, surface_treatment: ZINC AND CHROMATE OVERALL, peripheral_shape_style: ROUND. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-209-6510, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
9055735
NSN: 5310-00-209-6510
FSC: 5310 — Nuts and Washers
CAGE: 18876 — US ARMY AVIATION AND MISSILE COMMAND (USA)
SPECIFICATIONS
materialSTEEL OVERALL
thickness0.020 INCHES MINIMUM AND 0.030 INCHES MAXIMUM IN
hole_diameter0.114 INCHES MINIMUM AND 0.124 INCHES MAXIMUM IN
overall_diameter0.276 INCHES MINIMUM AND 0.286 INCHES MAXIMUM IN
surface_treatmentZINC AND CHROMATE OVERALL
peripheral_shape_styleROUND
center_hole_shape_styleROUND
cross-sectional_shape_styleRECTANGULAR
NSN5310-00-209-6510
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 9055735 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL DIAMETER: 0.276 INCHES MINIMUM AND 0.286 INCHES MAXIMUM IN
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
SURFACE TREATMENT: ZINC AND CHROMATE OVERALL
•
PERIPHERAL SHAPE STYLE: ROUND
•
MATERIAL: STEEL OVERALL
•
CENTER HOLE SHAPE STYLE: ROUND
•
HOLE DIAMETER: 0.114 INCHES MINIMUM AND 0.124 INCHES MAXIMUM IN
•
THICKNESS: 0.020 INCHES MINIMUM AND 0.030 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
OVERALL DIAMETER0.276 INCHES MINIMUM AND 0.286 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
SURFACE TREATMENTZINC AND CHROMATE OVERALL
PERIPHERAL SHAPE STYLEROUND
MATERIALSTEEL OVERALL
CENTER HOLE SHAPE STYLEROUND
HOLE DIAMETER0.114 INCHES MINIMUM AND 0.124 INCHES MAXIMUM IN
THICKNESS0.020 INCHES MINIMUM AND 0.030 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 2
1749-7Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
93485A005Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 9055735?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9055735?
9055735 is a WASHER,FLAT.
What parts can replace 9055735?
There are 2 known substitutes for 9055735: 1749-7, 93485A005. Substitute compatibility should be verified for your specific system.
What is the NSN for 9055735?
9055735 is cataloged in the U.S. Government catalog under NSN 5310-00-209-6510. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9055735

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.