PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 905505
905505 ✓ Verified by PartsTable
Ricoh · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a Ricoh industrial component. Key specifications include material: STEEL OVERALL, bore_shape: STRAIGHT, bore_diameter: 25.00 MILLIMETERS NOMINAL MM, contact_angle: 25.0 DEGREES MAXIMUM, overall_width: 0.8125 INCHES NOMINAL IN, alignment_type: SELF-ALIGNING. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-198-2318, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
905505
NSN: 3110-00-198-2318
FSC: 3110
CAGE: 24617 — GENERAL MOTORS CORP (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_shapeSTRAIGHT
bore_diameter25.00 MILLIMETERS NOMINAL MM
contact_angle25.0 DEGREES MAXIMUM
overall_width0.8125 INCHES NOMINAL IN
alignment_typeSELF-ALIGNING
load_directionANGULAR
surface_finishGROUND
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
lubrication_materialGREASE
self-alignment_locationINTERNAL
overall_outside_diameter52.00 MILLIMETERS NOMINAL MM
NSN3110-00-198-2318
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 905505 · Ricoh ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BORE DIAMETER: 25.00 MILLIMETERS NOMINAL MM
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
•
SURFACE FINISH: GROUND
•
CONTACT ANGLE: 25.0 DEGREES MAXIMUM
•
LUBRICATION MATERIAL: GREASE
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
BORE SHAPE: STRAIGHT
•
LOAD DIRECTION: ANGULAR
TECHNICAL CHARACTERISTICS (FLIS)
BORE DIAMETER25.00 MILLIMETERS NOMINAL MM
STANDARD TOLERANCE DESIGNATIONABEC NO.1
SURFACE FINISHGROUND
CONTACT ANGLE25.0 DEGREES MAXIMUM
LUBRICATION MATERIALGREASE
INTERNAL FIT-UP DESIGNATIONSTANDARD
BORE SHAPESTRAIGHT
LOAD DIRECTIONANGULAR
ALIGNMENT TYPESELF-ALIGNING
SELF-ALIGNMENT LOCATIONINTERNAL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 23
8169230Interchangeable
interchangeable cross-reference
interchangeable
55-05Interchangeable
interchangeable cross-reference
interchangeable
161Interchangeable
interchangeable cross-reference
interchangeable
FF-B-171/32J05B2EInterchangeable
interchangeable cross-reference
interchangeable
10947093Interchangeable
interchangeable cross-reference
interchangeable
5505X1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 905505?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 905505?
905505 is a BEARING,BALL,ANNULAR manufactured by Ricoh.
What parts can replace 905505?
There are 23 known substitutes for 905505: 8169230, 55-05, 161 and 20 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 905505?
905505 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-198-2318. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 905505

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026