Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The COIL,RADIO FREQUENCY is a the manufacturer industrial component. Key specifications include material: RUBBER ISOBUTYLENE-ISOPRENE CLASS IIR OR RUBBER BUTADIENE-STYRENE CLASS SBR OVERALL, body_length: 0.375 INCHES MINIMUM AND 0.415 INCHES MAXIMUM IN, hole_diameter: 0.219 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 2.719 INCHES NOMINAL IN, rating_method: ELECTRICAL SINGLE COMPONENT SINGLE WINDING, aperture_width: 1.719 INCHES NOMINAL IN. This product is currently in active production with full OEM support.
This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-720-2635, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
9053738
NSN:5330-00-720-2635 FSC:5330 CAGE:18876 — US ARMY AVIATION AND MISSILE COMMAND (USA)
SPECIFICATIONS
material
RUBBER ISOBUTYLENE-ISOPRENE CLASS IIR OR RUBBER BUTADIENE-STYRENE CLASS SBR OVERALL
body_length
0.375 INCHES MINIMUM AND 0.415 INCHES MAXIMUM IN
hole_diameter
0.219 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width
2.719 INCHES NOMINAL IN
rating_method
ELECTRICAL SINGLE COMPONENT SINGLE WINDING
aperture_width
1.719 INCHES NOMINAL IN
coil_form_type
SOLID SINGLE COMPONENT
inclosure_type
FULLY INCLOSED
overall_length
4.750 INCHES NOMINAL IN
quality_factor
57 MINIMUM SINGLE COMPONENT SINGLE WINDING
aperture_length
3.750 INCHES NOMINAL IN
hardness_rating
65.0 SHORE DUROMETER A MINIMUM AND 75.0 SHORE DUROMETER A MAXIMUM OVERALL
NSN
5330-00-720-2635
COMPONENT DIAGRAM
KEY FEATURES
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
INSIDE CORNER RADIUS: 0.250 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH: 2.219 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
STYLE DESIGNATOR: NON-CIRCULAR
•
MATERIAL DOCUMENT AND CLASSIFICATION: 417 GR RS715AB MIL STD ALL MATERIAL RESPONSES OVERALL
•
APERTURE LENGTH: 3.750 INCHES NOMINAL IN
•
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH: 0.250 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLE
SOLID SINGLE OR COMPOSITION
INSIDE CORNER RADIUS
0.250 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH
2.219 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
OVERALL WIDTH
2.719 INCHES NOMINAL IN
STYLE DESIGNATOR
NON-CIRCULAR
MATERIAL DOCUMENT AND CLASSIFICATION
417 GR RS715AB MIL STD ALL MATERIAL RESPONSES OVERALL
APERTURE LENGTH
3.750 INCHES NOMINAL IN
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH
0.250 INCHES NOMINAL IN
HARDNESS RATING
65.0 SHORE DUROMETER A MINIMUM AND 75.0 SHORE DUROMETER A MAXIMUM OVERALL
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9053738?
9053738 is a COIL,RADIO FREQUENCY.
What parts can replace 9053738?
There are 3 known substitutes for 9053738: SSD120, 27838, MS90537-38. Substitute compatibility should be verified for your specific system.
What is the NSN for 9053738?
9053738 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-720-2635. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.