PartsTable / COMPONENT / 9045743
9045743
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OVERALL, hardness_rating: 65.0 SHORE DUROMETER A MINIMUM AND 75.0 SHORE DUROMETER A MAXIMUM OVERALL, center_hole_diameter: 3.250 INCHES NOMINAL IN, cross-sectional_height: 0.125 INCHES NOMINAL IN, cross-sectional_shape_style: O-RING, material_document_and_classification: MIL-R-7362,TY 1 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-297-6257, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
9045743
NSN: 5330-00-297-6257 FSC: 5330 CAGE: 30379 — EUCLID INC (USA)
SPECIFICATIONS
material RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OVERALL hardness_rating 65.0 SHORE DUROMETER A MINIMUM AND 75.0 SHORE DUROMETER A MAXIMUM OVERALL center_hole_diameter 3.250 INCHES NOMINAL IN cross-sectional_height 0.125 INCHES NOMINAL IN cross-sectional_shape_style O-RING material_document_and_classification MIL-R-7362,TY 1 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL NSN 5330-00-297-6257
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 9045743
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• HARDNESS RATING: 65.0 SHORE DUROMETER A MINIMUM AND 75.0 SHORE DUROMETER A MAXIMUM OVERALL
• CENTER HOLE DIAMETER: 3.250 INCHES NOMINAL IN
• CROSS-SECTIONAL HEIGHT: 0.125 INCHES NOMINAL IN
• CROSS-SECTIONAL SHAPE STYLE: O-RING
• MATERIAL DOCUMENT AND CLASSIFICATION: MIL-R-7362,TY 1 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
• MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
HARDNESS RATING 65.0 SHORE DUROMETER A MINIMUM AND 75.0 SHORE DUROMETER A MAXIMUM OVERALL CENTER HOLE DIAMETER 3.250 INCHES NOMINAL IN CROSS-SECTIONAL HEIGHT 0.125 INCHES NOMINAL IN CROSS-SECTIONAL SHAPE STYLE O-RING MATERIAL DOCUMENT AND CLASSIFICATION MIL-R-7362,TY 1 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL MATERIAL RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
33685 Interchangeable interchangeable cross-reference
interchangeable
P101 Interchangeable interchangeable cross-reference
interchangeable
84120 Interchangeable interchangeable cross-reference
interchangeable
8C478 Interchangeable interchangeable cross-reference
interchangeable
45743 Interchangeable interchangeable cross-reference
interchangeable
LD203004-03 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 9045743?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9045743?
9045743 is a PACKING,PREFORMED.
What parts can replace 9045743?
There are 17 known substitutes for 9045743: 33685, P101, 84120 and 14 more. Substitute compatibility should be verified for your specific system.
Is 9045743 still available?
9045743 is currently cancelled.
Request a Quote — 9045743