PartsTable
Technical Data Sheet

9041-1/16 — 9041-1/16

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

9041-1/16: 9041-1/16.

The 9041-1/16 is a the manufacturer industrial component. Key specifications include diameter: 0.5000 INCHES NOMINAL IN, material: ALUMINUM ALLOY 6061, thickness: 0.0620 INCHES NOMINAL IN, body_style: RECTANGULAR, overall_width: 0.760 INCHES NOMINAL IN, overall_height: 0.063 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-393-4883, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 9041-1/16
NSN: 5340-01-393-4883
NIINs: 013934883, 013959678
FSC: 5340 — Hardware, Commercial
CAGE: 71643 — SAINT-GOBAIN PERFORMANCE PLASTICS INC. DBA SAINT GOBAIN PERFORMANCE PLASTICS INC. (USA)
SPECIFICATIONS
diameter0.5000 INCHES NOMINAL IN
materialALUMINUM ALLOY 6061
thickness0.0620 INCHES NOMINAL IN
body_styleRECTANGULAR
overall_width0.760 INCHES NOMINAL IN
overall_height0.063 INCHES NOMINAL IN
overall_length1.350 INCHES NOMINAL IN
surface_treatmentCHROMATE
unthreaded_mounting_hole_diameter0.104 INCHES NOMINAL SINGLE MOUNTING FACILITY IN
mounting_facility_type_and_quantity5 UNTHREADED HOLE(S) SINGLE MOUNTING FACILITY
material_document_and_classificationQQ-A-250/11 T6 .063IN. THICK FED SPEC ALL MATERIAL RESPONSES IN
accommodated_device_mounting_hole_quantity5
NSN5340-01-393-4883
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 9041-1/16 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DIAMETER: 0.5000 INCHES NOMINAL IN
•
MATERIAL: RUBBER SILICONE CLASS Q CUSHIONING
•
THICKNESS: 0.0620 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
DIAMETER0.5000 INCHES NOMINAL IN
MATERIALRUBBER SILICONE CLASS Q CUSHIONING
THICKNESS0.0620 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 1
A3113512-001Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 9041-1/16?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9041-1/16?
9041-1/16 is a 9041-1/16. It is classified as a MRO (MRO_GENERAL).
What parts can replace 9041-1/16?
There is 1 known substitute for 9041-1/16: A3113512-001. Substitute compatibility should be verified for your specific system.
What is the NSN for 9041-1/16?
9041-1/16 is cataloged in the U.S. Government catalog under NSN 5340-01-393-4883. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9041-1/16

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.