PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 904-15118
904-15118 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The BRACKET,MOUNTING is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 2024, overall_height: 0.500 INCHES NOMINAL IN, overall_length: 3.000 INCHES NOMINAL IN, surface_treatment: ANODIZE, mounting_hole_type: THREADED, part_name_assigned_by_controlling_agency: BRACKET, VELOCIMETER. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-476-3358, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
904-15118
NSN: 5340-01-476-3358
FSC: 5340
CAGE: 99866 — HONEYWELL INTERNATIONAL INC. DBA HONEYWELL DIV AEROSPACE -OLATHE HUMS DIV (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 2024
overall_height0.500 INCHES NOMINAL IN
overall_length3.000 INCHES NOMINAL IN
surface_treatmentANODIZE
mounting_hole_typeTHREADED
part_name_assigned_by_controlling_agencyBRACKET, VELOCIMETER
NSN5340-01-476-3358
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 904-15118 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT: ANODIZE
•
MOUNTING HOLE TYPE: THREADED
•
MATERIAL: ALUMINUM ALLOY 2024
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE TREATMENTANODIZE
MOUNTING HOLE TYPETHREADED
PART NAME ASSIGNED BY CONTROLLING AGENCYBRACKET, VELOCIMETER
OVERALL LENGTH3.000 INCHES NOMINAL IN
OVERALL HEIGHT0.500 INCHES NOMINAL IN
MATERIALALUMINUM ALLOY 2024
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
01845-1069Interchangeable
interchangeable cross-reference
interchangeable
2592AInterchangeable
interchangeable cross-reference
interchangeable
ME88-2Interchangeable
interchangeable cross-reference
interchangeable
15118Interchangeable
interchangeable cross-reference
interchangeable
2510 9/32Interchangeable
interchangeable cross-reference
interchangeable
C08766Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 904-15118?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 904-15118?
904-15118 is a BRACKET,MOUNTING.
What parts can replace 904-15118?
There are 18 known substitutes for 904-15118: 01845-1069, 2592A, ME88-2 and 15 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 904-15118?
904-15118 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-476-3358. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 904-15118

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026