PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 904-10329A
904-10329A ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The BRACKET,MOUNTING is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 2024, overall_width: 0.880 INCHES NOMINAL IN, overall_height: 0.810 INCHES NOMINAL IN, overall_length: 1.970 INCHES NOMINAL IN, surface_treatment: ANODIZE, mounting_hole_type: THREADED. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-476-3342, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
904-10329A
NSN: 5340-01-476-3342
FSC: 5340
CAGE: 4Z9A3 — DIAGNOSTIC SOLUTIONS INTERNATIONAL LLC DBA DIAGNOSTIC SOLUTIONS (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 2024
overall_width0.880 INCHES NOMINAL IN
overall_height0.810 INCHES NOMINAL IN
overall_length1.970 INCHES NOMINAL IN
surface_treatmentANODIZE
mounting_hole_typeTHREADED
mounting_hole_diameter0.250 INCHES NOMINAL IN
part_name_assigned_by_controlling_agencyBLOCK,ACCELEROMETER MOUNT
NSN5340-01-476-3342
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 904-10329A MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT: ANODIZE
•
MOUNTING HOLE TYPE: THREADED
•
MOUNTING HOLE DIAMETER: 0.250 INCHES NOMINAL IN
•
MATERIAL: ALUMINUM ALLOY 2024
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL LENGTH1.970 INCHES NOMINAL IN
SURFACE TREATMENTANODIZE
OVERALL WIDTH0.880 INCHES NOMINAL IN
MOUNTING HOLE TYPETHREADED
MOUNTING HOLE DIAMETER0.250 INCHES NOMINAL IN
MATERIALALUMINUM ALLOY 2024
OVERALL HEIGHT0.810 INCHES NOMINAL IN
PART NAME ASSIGNED BY CONTROLLING AGENCYBLOCK,ACCELEROMETER MOUNT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
10329Upgraded Successor
successor cross-reference
successor
380135-S43Interchangeable
interchangeable cross-reference
interchangeable
MS51922-37Interchangeable
interchangeable cross-reference
interchangeable
103291Interchangeable
interchangeable cross-reference
interchangeable
A-A-2823Interchangeable
interchangeable cross-reference
interchangeable
MS16904-155Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 904-10329A?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 904-10329A?
904-10329A is a BRACKET,MOUNTING.
What parts can replace 904-10329A?
There are 17 known substitutes for 904-10329A: 10329, 380135-S43, MS51922-37 and 14 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 904-10329A?
904-10329A is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-476-3342. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 904-10329A

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026