PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 9034C74
9034C74 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The BEARING,BALL,DUPLEX is a the manufacturer industrial component. Key specifications include material: GREASE LUBRICATION, seal_width: 7.7 MILLIMETERS MINIMUM AND 8.3 MILLIMETERS MAXIMUM MM, construction: SOLID, bore_diameter: 35.0 MILLIMETERS NOMINAL MM, contact_angle: 60.00 DEGREES NOMINAL, overall_width: 30.0 MILLIMETERS NOMINAL MM. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-525-3562, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
9034C74
NSN: 5330-01-525-3562
FSC: 5330
CAGE: 94259 — FLUOR MARINE PROPULSION, LLC (USA)
SPECIFICATIONS
materialGREASE LUBRICATION
seal_width7.7 MILLIMETERS MINIMUM AND 8.3 MILLIMETERS MAXIMUM MM
constructionSOLID
bore_diameter35.0 MILLIMETERS NOMINAL MM
contact_angle60.00 DEGREES NOMINAL
overall_width30.0 MILLIMETERS NOMINAL MM
load_directionANGULAR
surface_finishGROUND
outside_diameter62.2 MILLIMETERS NOMINAL MM
special_featuresHARDNESS - ROCKWELL RC 78.0
style_designatorUNIVERSAL GROUND FACES, LOADING GROOVE, NON-SEPARABLE
surface_treatmentPLASTIC CASE
NSN5330-01-525-3562
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 9034C74 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ACCOMMODATED SHAFT DIAMETER: 45.0 MILLIMETERS NOMINAL MM
•
SEAL WIDTH: 7.7 MILLIMETERS MINIMUM AND 8.3 MILLIMETERS MAXIMUM MM
•
OUTSIDE DIAMETER: 62.2 MILLIMETERS NOMINAL MM
•
CONSTRUCTION: SOLID
•
HOUSING BORE DIAMETER: 61.8 MILLIMETERS MINIMUM AND 62.1 MILLIMETERS MAXIMUM MM
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR SEALING ELEMENT
•
CROSS-SECTIONAL SHAPE STYLE: SINGLE LIP
TECHNICAL CHARACTERISTICS (FLIS)
ACCOMMODATED SHAFT DIAMETER45.0 MILLIMETERS NOMINAL MM
SEAL WIDTH7.7 MILLIMETERS MINIMUM AND 8.3 MILLIMETERS MAXIMUM MM
OUTSIDE DIAMETER62.2 MILLIMETERS NOMINAL MM
CONSTRUCTIONSOLID
END ITEM IDENTIFICATIONTGRM GATE BEARING CARTRIDGE ASSEMBLY
HOUSING BORE DIAMETER61.8 MILLIMETERS MINIMUM AND 62.1 MILLIMETERS MAXIMUM MM
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR SEALING ELEMENT
CROSS-SECTIONAL SHAPE STYLESINGLE LIP
SURFACE TREATMENTPLASTIC CASE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
17754Interchangeable
interchangeable cross-reference
interchangeable
T17754Interchangeable
interchangeable cross-reference
interchangeable
157D1-0889Interchangeable
interchangeable cross-reference
interchangeable
40821Interchangeable
interchangeable cross-reference
interchangeable
WE2415Interchangeable
interchangeable cross-reference
interchangeable
1-00823Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 9034C74?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9034C74?
9034C74 is a BEARING,BALL,DUPLEX.
What parts can replace 9034C74?
There are 17 known substitutes for 9034C74: 17754, T17754, 157D1-0889 and 14 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 9034C74?
9034C74 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-525-3562. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9034C74

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026