PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 9033824
9033824 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PIN,STRAIGHT,HEADED is a the manufacturer industrial component. Key specifications include height: 0.250 INCHES NOMINAL IN, diameter: 0.312 INCHES NOMINAL IN, material: STEEL OVERALL, head_style: ROUND, style_designator: STRAIGHT, pin_head_diameter: 0.500 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-614-3600, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
9033824
NSN: 5315-00-614-3600
FSC: 5315
CAGE: 18876 — US ARMY AVIATION AND MISSILE COMMAND (USA)
SPECIFICATIONS
height0.250 INCHES NOMINAL IN
diameter0.312 INCHES NOMINAL IN
materialSTEEL OVERALL
head_styleROUND
style_designatorSTRAIGHT
pin_head_diameter0.500 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN
surface_treatmentCADMIUM OVERALL
under_head_length1.250 INCHES NOMINAL IN
first_hole_diameter0.109 INCHES NOMINAL IN
hole_arrangement_styleONE END DRILLED
distance_from_centerline_of_hole_to_end_of_pin0.188 INCHES NOMINAL IN
NSN5315-00-614-3600
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 9033824 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN: 0.188 INCHES NOMINAL IN
•
HEIGHT: 0.250 INCHES NOMINAL IN
•
UNDER HEAD LENGTH: 1.250 INCHES NOMINAL IN
•
FIRST HOLE DIAMETER: 0.109 INCHES NOMINAL IN
•
HOLE ARRANGEMENT STYLE: ONE END DRILLED
•
HEAD STYLE: ROUND
•
SURFACE TREATMENT: CADMIUM OVERALL
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN0.188 INCHES NOMINAL IN
HEIGHT0.250 INCHES NOMINAL IN
UNDER HEAD LENGTH1.250 INCHES NOMINAL IN
FIRST HOLE DIAMETER0.109 INCHES NOMINAL IN
HOLE ARRANGEMENT STYLEONE END DRILLED
HEAD STYLEROUND
SURFACE TREATMENTCADMIUM OVERALL
MATERIALSTEEL OVERALL
DIAMETER0.312 INCHES NOMINAL IN
PIN HEAD DIAMETER0.500 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
1000-130VInterchangeable
interchangeable cross-reference
interchangeable
3341-3/15CInterchangeable
interchangeable cross-reference
interchangeable
TS-3864Interchangeable
interchangeable cross-reference
interchangeable
DMS 81084BInterchangeable
interchangeable cross-reference
interchangeable
9163 LUPInterchangeable
interchangeable cross-reference
interchangeable
9163-LPDInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 9033824?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9033824?
9033824 is a PIN,STRAIGHT,HEADED.
What parts can replace 9033824?
There are 11 known substitutes for 9033824: 1000-130V, 3341-3/15C, TS-3864 and 8 more. Substitute compatibility should be verified for your specific system.
Is 9033824 still available?
9033824 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9033824

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026