PartsTable
Technical Data Sheet
9033533 ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

CAP-PLUG,PROTECTIVE,DUST AND MOI. Key specifications include material: PLASTIC, length_under_shoulder: 0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN, open_end_inside_diameter: 0.654 INCHES MINIMUM AND 0.674 INCHES MAXIMUM IN, closed_end_overall_diameter: 0.630 INCHES MINIMUM AND 0.650 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-582-7162, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
9033533
NSN: 5340-00-582-7162
FSC: 5340
CAGE: 18876 — US ARMY AVIATION AND MISSILE COMMAND (USA)
SPECIFICATIONS
materialPLASTIC
length_under_shoulder0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN
open_end_inside_diameter0.654 INCHES MINIMUM AND 0.674 INCHES MAXIMUM IN
closed_end_overall_diameter0.630 INCHES MINIMUM AND 0.650 INCHES MAXIMUM IN
NSN5340-00-582-7162
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 9033533 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
CLOSED END OVERALL DIAMETER: 0.630 INCHES MINIMUM AND 0.650 INCHES MAXIMUM IN
MATERIAL: PLASTIC
OPEN END INSIDE DIAMETER: 0.654 INCHES MINIMUM AND 0.674 INCHES MAXIMUM IN
LENGTH UNDER SHOULDER: 0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
CLOSED END OVERALL DIAMETER0.630 INCHES MINIMUM AND 0.650 INCHES MAXIMUM IN
MATERIALPLASTIC
OPEN END INSIDE DIAMETER0.654 INCHES MINIMUM AND 0.674 INCHES MAXIMUM IN
LENGTH UNDER SHOULDER0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 30
G10125PC37Upgraded Successor
successor cross-reference
successor
PC451S42-027PC436Upgraded Successor
successor cross-reference
successor
PC461S42-281PC436Upgraded Successor
successor cross-reference
successor
72-8396-036Upgraded Successor
successor cross-reference
successor
72-83960-036Upgraded Successor
successor cross-reference
successor
2471063Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusCANCELLED
Availability
RoHS CompliantEAR99Not HAZMAT
Ready to buy 9033533?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9033533?
9033533 is a CAP-PLUG,PROTECTIVE,DUST AND MOI.
What parts can replace 9033533?
There are 30 known substitutes for 9033533: G10125PC37, PC451S42-027PC436, PC461S42-281PC436 and 27 more. Substitute compatibility should be verified for your specific system.
Is 9033533 still available?
9033533 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9033533