PartsTable
Technical Data Sheet
Download PDF

90316A196 — SCREW,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

90316A196: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: HEXAGON EXTENDED WASHER, head_height: 0.141 INCHES NOMINAL IN, thread_class: 2A A, thread_length: 0.625 INCHES NOMINAL IN, screw_material: STEEL CORROSION RESISTING, fastener_length: 0.625 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-610-6796, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
90316A196
NSN: 5305-01-610-6796
FSC: 5305 — Screws
CAGE: 0KVE6 — MCMASTER-CARR SUPPLY CO (USA)
SPECIFICATIONS
head_styleHEXAGON EXTENDED WASHER
head_height0.141 INCHES NOMINAL IN
thread_class2A A
thread_length0.625 INCHES NOMINAL IN
screw_materialSTEEL CORROSION RESISTING
fastener_length0.625 INCHES NOMINAL IN
thread_directionRIGHT-HAND
width_between_flats0.250 INCHES NOMINAL IN
internal_drive_styleSLOT
end_item_identification4120-01-592-7949
nominal_thread_diameter0.169 INCHES IN
extended_washer_diameter0.348 INCHES NOMINAL IN
NSN5305-01-610-6796
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 90316A196 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.141 INCHES NOMINAL IN
•
FASTENER LENGTH: 0.625 INCHES NOMINAL IN
•
EXTENDED WASHER DIAMETER: 0.348 INCHES NOMINAL IN
•
THREAD LENGTH: 0.625 INCHES NOMINAL IN
•
NOMINAL THREAD DIAMETER: 0.169 INCHES IN
•
HEAD STYLE: HEXAGON EXTENDED WASHER
•
THREAD DIRECTION: RIGHT-HAND
•
WIDTH BETWEEN FLATS: 0.250 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.141 INCHES NOMINAL IN
FASTENER LENGTH0.625 INCHES NOMINAL IN
EXTENDED WASHER DIAMETER0.348 INCHES NOMINAL IN
THREAD LENGTH0.625 INCHES NOMINAL IN
NOMINAL THREAD DIAMETER0.169 INCHES IN
HEAD STYLEHEXAGON EXTENDED WASHER
THREAD DIRECTIONRIGHT-HAND
WIDTH BETWEEN FLATS0.250 INCHES NOMINAL IN
SCREW MATERIALSTEEL CORROSION RESISTING
INTERNAL DRIVE STYLESLOT
SUBSTITUTES & CROSS-REFERENCES 3
10-52923Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
10-52923-04Reference document
Same NSN cross-reference
Reference document — Secondary reference
10-52923-02Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 90316A196?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 90316A196?
90316A196 is a SCREW,MACHINE.
What parts can replace 90316A196?
There are 3 known substitutes for 90316A196: 10-52923, 10-52923-04, 10-52923-02. Substitute compatibility should be verified for your specific system.
What is the NSN for 90316A196?
90316A196 is cataloged in the U.S. Government catalog under NSN 5305-01-610-6796. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 90316A196