PartsTable
Technical Data Sheet
Download PDF

90275A189 — SCREW,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

90275A189: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK UNDERCUT, head_height: 0.070 INCHES NOMINAL IN, thread_class: 2A A, head_diameter: 0.312 INCHES NOMINAL IN, thread_length: 0.118 INCHES NOMINAL IN, screw_material: STEEL. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-642-3499, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
90275A189
NSN: 5305-01-642-3499
FSC: 5305 — Screws
CAGE: 3A054 — MCMASTER-CARR SUPPLY CO (USA)
SPECIFICATIONS
head_styleFLAT COUNTERSUNK UNDERCUT
head_height0.070 INCHES NOMINAL IN
thread_class2A A
head_diameter0.312 INCHES NOMINAL IN
thread_length0.118 INCHES NOMINAL IN
screw_materialSTEEL
fastener_length0.258 INCHES NOMINAL IN
thread_directionRIGHT-HAND
countersink_angle82.0 DEGREES NOMINAL
internal_drive_styleSLOT
end_item_identificationAEHF
nominal_thread_diameter0.164 INCHES IN
NSN5305-01-642-3499
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 90275A189 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.070 INCHES NOMINAL IN
•
SCREW SURFACE TREATMENT: ZINC
•
FASTENER LENGTH: 0.258 INCHES NOMINAL IN
•
THREAD LENGTH: 0.118 INCHES NOMINAL IN
•
NOMINAL THREAD DIAMETER: 0.164 INCHES IN
•
HEAD STYLE: FLAT COUNTERSUNK UNDERCUT
•
THREAD DIRECTION: RIGHT-HAND
•
SCREW MATERIAL: STEEL
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.070 INCHES NOMINAL IN
SCREW SURFACE TREATMENTZINC
FASTENER LENGTH0.258 INCHES NOMINAL IN
THREAD LENGTH0.118 INCHES NOMINAL IN
NOMINAL THREAD DIAMETER0.164 INCHES IN
HEAD STYLEFLAT COUNTERSUNK UNDERCUT
THREAD DIRECTIONRIGHT-HAND
SCREW MATERIALSTEEL
INTERNAL DRIVE STYLESLOT
COUNTERSINK ANGLE82.0 DEGREES NOMINAL
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-001-5016 5305-00-001-9160 5305-00-001-9629 5305-00-001-9742 5305-00-001-9768 5305-00-003-4306 5305-00-003-6694 5305-00-003-6753
SUBSTITUTES & CROSS-REFERENCES 1
1001SN3264Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 90275A189?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 90275A189?
90275A189 is a SCREW,MACHINE.
What parts can replace 90275A189?
There is 1 known substitute for 90275A189: 1001SN3264. Substitute compatibility should be verified for your specific system.
What is the NSN for 90275A189?
90275A189 is cataloged in the U.S. Government catalog under NSN 5305-01-642-3499. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 90275A189

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.