PartsTable
Technical Data Sheet
Download PDF

90272A830 — SCREW,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

90272A830: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: PAN NO. 2, head_height: 0.133 INCHES NOMINAL IN, thread_length: 0.625 INCHES NOMINAL IN, screw_material: STEEL, fastener_length: 0.625 INCHES NOMINAL IN, thread_direction: RIGHT-HAND.

This part is cataloged in the U.S. Government catalog under NSN 5305-01-580-6784, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
90272A830
NSN: 5305-01-580-6784
FSC: 5305 — Screws
CAGE: 2V507 — MCMASTER-CARR SUPPLY COMPANY (USA)
SPECIFICATIONS
head_stylePAN NO. 2
head_height0.133 INCHES NOMINAL IN
thread_length0.625 INCHES NOMINAL IN
screw_materialSTEEL
fastener_length0.625 INCHES NOMINAL IN
thread_directionRIGHT-HAND
width_between_flats0.375 INCHES NOMINAL IN
internal_drive_styleCROSS RECESS TYPE 1
supplementary_featuresNO. 2 DRIVE STYLE
end_item_identification5820-01-545-6691; ANMRC-142 C RADIO SET; MRAP - COUGAR
nominal_thread_diameter0.190 INCHES IN
screw_surface_treatmentZINC
NSN5305-01-580-6784
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 90272A830 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.133 INCHES NOMINAL IN
•
SCREW SURFACE TREATMENT: ZINC
•
FASTENER LENGTH: 0.625 INCHES NOMINAL IN
•
THREAD LENGTH: 0.625 INCHES NOMINAL IN
•
SUPPLEMENTARY FEATURES: NO. 2 DRIVE STYLE
•
NOMINAL THREAD DIAMETER: 0.190 INCHES IN
•
HEAD STYLE: PAN NO. 2
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.133 INCHES NOMINAL IN
SCREW SURFACE TREATMENTZINC
FASTENER LENGTH0.625 INCHES NOMINAL IN
THREAD LENGTH0.625 INCHES NOMINAL IN
SUPPLEMENTARY FEATURESNO. 2 DRIVE STYLE
NOMINAL THREAD DIAMETER0.190 INCHES IN
HEAD STYLEPAN NO. 2
THREAD DIRECTIONRIGHT-HAND
WIDTH BETWEEN FLATS0.375 INCHES NOMINAL IN
SCREW MATERIALSTEEL
SUBSTITUTES & CROSS-REFERENCES 1
29055Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 90272A830?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 90272A830?
90272A830 is a SCREW,MACHINE.
What parts can replace 90272A830?
There is 1 known substitute for 90272A830: 29055. Substitute compatibility should be verified for your specific system.
What is the NSN for 90272A830?
90272A830 is cataloged in the U.S. Government catalog under NSN 5305-01-580-6784. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 90272A830

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.