PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 9023754
9023754 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The ADAPTER,STRAIGHT,PIPE TO TUBE is a the manufacturer industrial component. Key specifications include material: ASPHALT AND WOOL OVERALL, overall_width: 2.205 INCHES NOMINAL IN, aperture_width: 1.705 INCHES NOMINAL IN, overall_length: 5.205 INCHES NOMINAL IN, aperture_length: 4.705 INCHES NOMINAL IN, style_designator: NON-CIRCULAR. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-481-4315, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
9023754
NSN: 5330-00-481-4315
FSC: 5330
CAGE: 97907 — TEREX CORP (USA)
SPECIFICATIONS
materialASPHALT AND WOOL OVERALL
overall_width2.205 INCHES NOMINAL IN
aperture_width1.705 INCHES NOMINAL IN
overall_length5.205 INCHES NOMINAL IN
aperture_length4.705 INCHES NOMINAL IN
style_designatorNON-CIRCULAR
inside_corner_radius0.125 INCHES NOMINAL IN
cross-sectional_width0.250 INCHES NOMINAL IN
outside_corner_radius0.125 INCHES NOMINAL IN
cross-sectional_height0.062 INCHES NOMINAL IN
cross-sectional_shape_styleRECTANGULAR
NSN5330-00-481-4315
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 9023754 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
APERTURE LENGTH: 4.705 INCHES NOMINAL IN
•
STYLE DESIGNATOR: NON-CIRCULAR
•
MATERIAL: ASPHALT AND WOOL OVERALL
•
OUTSIDE CORNER RADIUS: 0.125 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
CROSS-SECTIONAL WIDTH: 0.250 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL LENGTH5.205 INCHES NOMINAL IN
OVERALL WIDTH2.205 INCHES NOMINAL IN
APERTURE LENGTH4.705 INCHES NOMINAL IN
STYLE DESIGNATORNON-CIRCULAR
MATERIALASPHALT AND WOOL OVERALL
OUTSIDE CORNER RADIUS0.125 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
CROSS-SECTIONAL WIDTH0.250 INCHES NOMINAL IN
INSIDE CORNER RADIUS0.125 INCHES NOMINAL IN
APERTURE WIDTH1.705 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
352X4Interchangeable
interchangeable cross-reference
interchangeable
26-X-50Interchangeable
interchangeable cross-reference
interchangeable
4303Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 9023754?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9023754?
9023754 is a ADAPTER,STRAIGHT,PIPE TO TUBE.
What parts can replace 9023754?
There are 3 known substitutes for 9023754: 352X4, 26-X-50, 4303. Substitute compatibility should be verified for your specific system.
What is the NSN for 9023754?
9023754 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-481-4315. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9023754

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026