PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 902007
902007 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The BRUSH,WIRE,ROTARY END is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY FILL, wire_fill_type: STRAIGHT, outside_diameter: 0.250 INCHES NOMINAL IN, special_features: BRUSH LENGTH 2 INCHES;OVERALL LENGTH 4 INCHES;1/4 INCH HEX QUICK RELEASE SHANK;END ITEM:5130-01-672-4909 IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-187-0837, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
902007
NSN: 5340-01-187-0837
FSC: 5340
CAGE: 60119 — MONADNOCK COMPANY, THE DBA LISI AEROSPACE (USA)
SPECIFICATIONS
materialCOPPER ALLOY FILL
wire_fill_typeSTRAIGHT
outside_diameter0.250 INCHES NOMINAL IN
special_featuresBRUSH LENGTH 2 INCHES;OVERALL LENGTH 4 INCHES;1/4 INCH HEX QUICK RELEASE SHANK;END ITEM:5130-01-672-4909 IN
NSN5340-01-187-0837
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 902007 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
KNUCKLE TYPE: FRICTION
•
REVERSIBLE FEATURE: NOT INCLUDED
•
MATERIAL THICKNESS: 0.125 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5626,COMP 4140 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
KNUCKLE INSIDE DIAMETER: 0.160 INCHES MINIMUM AND 0.165 INCHES MAXIMUM IN
•
MOUNTING HOLE QUANTITY: 2
•
MATERIAL: STEEL COMP 4140 OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
KNUCKLE TYPEFRICTION
REVERSIBLE FEATURENOT INCLUDED
MATERIAL THICKNESS0.125 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5626,COMP 4140 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
KNUCKLE INSIDE DIAMETER0.160 INCHES MINIMUM AND 0.165 INCHES MAXIMUM IN
MOUNTING HOLE QUANTITY2
OVERALL LENGTH1.500 INCHES NOMINAL IN
MATERIALSTEEL COMP 4140 OVERALL
HINGE PINNOT INCLUDED
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
90400200Interchangeable
interchangeable cross-reference
interchangeable
90200-7Interchangeable
interchangeable cross-reference
interchangeable
90200Interchangeable
interchangeable cross-reference
interchangeable
H19020-07Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 902007?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 902007?
902007 is a BRUSH,WIRE,ROTARY END.
What parts can replace 902007?
There are 4 known substitutes for 902007: 90400200, 90200-7, 90200 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 902007?
902007 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-187-0837. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 902007

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026