PartsTable
Technical Data Sheet
Download PDF

902-288-2SH — CLAMP,HOSE

✓ Government record, cited
— · HOSE FITTING
PRODUCT OVERVIEW

902-288-2SH: CLAMP,HOSE.

The CLAMP,HOSE is a the manufacturer industrial component. Key specifications include material: STEEL BOLT, temp_rating: 450.0 FAHRENHEIT DEGF, overall_width: 0.562 INCHES NOMINAL IN, inside_diameter: 2.880 INCHES NOMINAL IN, special_features: FURNISHED W/TWO CRES SUPPORT CLIPS, style_designator: BAND. This part is cataloged in the U.S.

Government catalog under NSN 4730-01-191-4137, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
902-288-2SH
NSN: 4730-01-191-4137
FSC: 4730 — Hose, Pipe, Tube, Lubrication, and Railing Fittings
CAGE: 00624 — EATON AEROQUIP LLC DBA JACKSON NORTH 1 DIV FLUID AND ELECTRICAL DISTRIBUTION (USA)
SPECIFICATIONS
materialSTEEL BOLT
temp_rating450.0 FAHRENHEIT DEGF
overall_width0.562 INCHES NOMINAL IN
inside_diameter2.880 INCHES NOMINAL IN
special_featuresFURNISHED W/TWO CRES SUPPORT CLIPS
style_designatorBAND
surface_treatmentCADMIUM BOLT
fastening_device_typeSELF-LOCKING HEXAGON NUT
material_document_and_classificationMIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE BAND
NSN4730-01-191-4137
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: 902-288-2SH · OEM ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: 450.0 FAHRENHEIT DEGF
•
FASTENING DEVICE TYPE: SELF-LOCKING HEXAGON NUT
•
STYLE DESIGNATOR: BAND
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE BAND
•
INSIDE DIAMETER: 2.880 INCHES NOMINAL IN
•
SURFACE TREATMENT: CADMIUM BOLT
TECHNICAL CHARACTERISTICS
TEMP RATING450.0 FAHRENHEIT DEGF
FASTENING DEVICE TYPESELF-LOCKING HEXAGON NUT
STYLE DESIGNATORBAND
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE BAND
OVERALL WIDTH0.562 INCHES NOMINAL IN
INSIDE DIAMETER2.880 INCHES NOMINAL IN
SPECIAL FEATURESFURNISHED W/TWO CRES SUPPORT CLIPS
SURFACE TREATMENTCADMIUM BOLT
MATERIALSTEEL COMP 301 BAND
MATERIALSTEEL NUT
SUBSTITUTES & CROSS-REFERENCES 2
GC501KReference document
Same NSN cross-reference
Reference document — Drawing number reference only
GC501K288H2Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 902-288-2SH?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 902-288-2SH?
902-288-2SH is a CLAMP,HOSE.
What parts can replace 902-288-2SH?
There are 2 known substitutes for 902-288-2SH: GC501K, GC501K288H2. Substitute compatibility should be verified for your specific system.
What is the NSN for 902-288-2SH?
902-288-2SH is cataloged in the U.S. Government catalog under NSN 4730-01-191-4137. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 902-288-2SH

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.