PartsTable
Technical Data Sheet
Download PDF

9019936 — BRACKET,ANGLE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

9019936: BRACKET,ANGLE.

The BRACKET,ANGLE is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 2024, first_leg_style: END RADIUS, first_leg_width: 0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN, second_leg_style: END RADIUS, second_leg_width: 0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN, special_features: FURNISHED WITH ONE NUT,PLAIN,BLIND RIVET. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-771-2333, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
9019936
NSN: 5340-00-771-2333
FSC: 5340 — Hardware, Commercial
CAGE: 18876 — US ARMY AVIATION AND MISSILE COMMAND (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 2024
first_leg_styleEND RADIUS
first_leg_width0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN
second_leg_styleEND RADIUS
second_leg_width0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN
special_featuresFURNISHED WITH ONE NUT,PLAIN,BLIND RIVET
surface_treatmentPAINT
first_leg_end_radius0.219 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN
second_leg_end_radius0.219 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN
first_leg_hole_diameter0.277 INCHES MINIMUM AND 0.290 INCHES MAXIMUM IN
second_leg_hole_diameter0.277 INCHES MINIMUM AND 0.290 INCHES MAXIMUM IN
first_leg_hole_arrangement_styleONE HOLE
NSN5340-00-771-2333
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 9019936 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.219 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN
•
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.219 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN
•
FIRST LEG HOLE DIAMETER: 0.277 INCHES MINIMUM AND 0.290 INCHES MAXIMUM IN
•
SECOND LEG HOLE DIAMETER: 0.277 INCHES MINIMUM AND 0.290 INCHES MAXIMUM IN
•
SECOND LEG WIDTH: 0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN
•
FIRST LEG HOLE ARRANGEMENT STYLE: ONE HOLE
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH: 0.219 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN
•
FIRST LEG STYLE: END RADIUS
TECHNICAL CHARACTERISTICS
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.219 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.219 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN
FIRST LEG HOLE DIAMETER0.277 INCHES MINIMUM AND 0.290 INCHES MAXIMUM IN
SECOND LEG HOLE DIAMETER0.277 INCHES MINIMUM AND 0.290 INCHES MAXIMUM IN
SECOND LEG WIDTH0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN
FIRST LEG HOLE ARRANGEMENT STYLEONE HOLE
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH0.219 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN
FIRST LEG STYLEEND RADIUS
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-250/5,ALCLAD T3 FED SPEC SINGLE MATERIAL RESPONSE
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH0.219 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 9019936?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9019936?
9019936 is a BRACKET,ANGLE.
What is the NSN for 9019936?
9019936 is cataloged in the U.S. Government catalog under NSN 5340-00-771-2333. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9019936

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.