The BRACKET,ANGLE is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 2024, first_leg_angle: 90.0 DEGREES NOMINAL, first_leg_style: END RADIUS, first_leg_width: 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN, first_leg_length: 0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM IN, second_leg_style: END RADIUS. This part is cataloged in the U.S.
Government catalog under NSN 5340-00-754-1737, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
9019631
NSN:5340-00-754-1737 FSC:5340 — Hardware, Commercial CAGE:18876 — US ARMY AVIATION AND MISSILE COMMAND (USA)
SPECIFICATIONS
material
ALUMINUM ALLOY 2024
first_leg_angle
90.0 DEGREES NOMINAL
first_leg_style
END RADIUS
first_leg_width
0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
first_leg_length
0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM IN
second_leg_style
END RADIUS
second_leg_width
0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
special_features
FURNISHED WITH TWO NUTS,PLAIN,BLIND RIVETS
style_designator
ANGLE
second_leg_length
0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN
surface_treatment
CHROMATE ZINC
first_leg_thickness
0.054 INCHES MINIMUM AND 0.074 INCHES MAXIMUM IN
NSN
5340-00-754-1737
COMPONENT DIAGRAM
KEY FEATURES
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
•
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
•
FIRST LEG HOLE DIAMETER: 0.194 INCHES MINIMUM AND 0.214 INCHES MAXIMUM IN
•
FIRST LEG ANGLE: 90.0 DEGREES NOMINAL
•
SECOND LEG HOLE DIAMETER: 0.194 INCHES MINIMUM AND 0.214 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: TT-P-1757 FED SPEC SINGLE TREATMENT RESPONSE
•
SECOND LEG WIDTH: 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
•
SECOND LEG LENGTH: 0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH
0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH
0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
FIRST LEG HOLE DIAMETER
0.194 INCHES MINIMUM AND 0.214 INCHES MAXIMUM IN
FIRST LEG ANGLE
90.0 DEGREES NOMINAL
SECOND LEG HOLE DIAMETER
0.194 INCHES MINIMUM AND 0.214 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
TT-P-1757 FED SPEC SINGLE TREATMENT RESPONSE
SECOND LEG WIDTH
0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
SECOND LEG LENGTH
0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN
FIRST LEG HOLE ARRANGEMENT STYLE
ONE HOLE
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH
0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9019631?
9019631 is a BRACKET,ANGLE.
What is the NSN for 9019631?
9019631 is cataloged in the U.S. Government catalog under NSN 5340-00-754-1737. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.