PartsTable
Technical Data Sheet
PartsTable / MRO / 9019-1
9019-1 ✓ Verified by PartsTable
Esselte · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
SAS cables have specific lane counts: 4i (internal) or 4e (external) Cable length matters — too short won't reach, too long creates clutter
Verify connector type on BOTH ends — many SAS cables are asymmetric
PRODUCT OVERVIEW

The Rapid Classic 1 is the world's best selling plier and the florist's favourite. It's superior durability make it the perfect choice for the mail room, shops, store, home and office.<br><br>The Classic Plier has an all chrome plated metal construction. It has a 50 sheets capacity using 5/16" staples and is also compatible with standard staples.<br><br>Features an adjustable anvil for temporary stapling.

Made in Sweden.<br><br>- 50 sheet capacity using 5/16” staples<br>- Can also use standard staples<br>- All chrome plated metal construction<br>- Adjustable anvil for temporary stapling<br>- Made in Sweden This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5999-00-835-2248, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
MRO→ MRO_GENERAL→ 9019-1
NSN: 5999-00-835-2248
FSC: 5999
CAGE: 07700 — TECHNICAL WIRE PRODUCTS, LLC DBA TWP (USA)
SPECIFICATIONS
special_featuresCAVITRON FILTER, LAVAGE PUMP; 10 PACK; FOR USE WITH END ITEM ULTRASONIC PROPHYLAXIS UNIT,DENTAL, NSN 6520-01-549-0030
end_item_identification6520-01-549-0030
part_name_assigned_by_controlling_agencyFILTER LAVAGE PUMP ULTRASONIC PROPHYLAXIS UNIT DENTAL 10S
NSN5999-00-835-2248
COMPONENT DIAGRAM
CONN A SFF-8482 CONN B SFF-8087 LENGTH: SAS CABLE ASSEMBLY | SFF-8482 to SFF-8087 Cable length: | SAS | Shielded TITLE CABLE ASSY PN 9019-1 MFR Esselte COMPARATOR MODULE,SIGNAL
KEY FEATURES
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH: 2.094 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: UNABLE TO DECODE
•
OUTSIDE CORNER BEVEL LENGTH ALONG WIDTH: 0.125 INCHES NOMINAL IN
•
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH: 0.375 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH: 2.125 INCHES NOMINAL IN
•
ENVIRONMENTAL PROTECTION MATERIAL LOCATION: AROUND RF SHIELDING GASKET APERTURE
•
CROSS-SECTIONAL HEIGHT: 0.156 INCHES MINIMUM AND 0.172 INCHES MAXIMUM IN
•
BOLT HOLE QUANTITY: 14
TECHNICAL CHARACTERISTICS (FLIS)
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH2.094 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONUNABLE TO DECODE
OUTSIDE CORNER BEVEL LENGTH ALONG WIDTH0.125 INCHES NOMINAL IN
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH0.375 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH2.125 INCHES NOMINAL IN
ENVIRONMENTAL PROTECTION MATERIAL LOCATIONAROUND RF SHIELDING GASKET APERTURE
CROSS-SECTIONAL HEIGHT0.156 INCHES MINIMUM AND 0.172 INCHES MAXIMUM IN
BOLT HOLE QUANTITY14
MATERIALUNABLE TO DECODE
MATERIALUNABLE TO DECODE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
90191Interchangeable
interchangeable cross-reference
interchangeable
ES1219-10Interchangeable
interchangeable cross-reference
interchangeable
SS9094-001Interchangeable
interchangeable cross-reference
interchangeable
BM65240Interchangeable
interchangeable cross-reference
interchangeable
H90191Interchangeable
interchangeable cross-reference
interchangeable
901912Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99ESD SensitiveNot HAZMAT
Ready to buy 9019-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9019-1?
9019-1 is a COMPARATOR MODULE,SIGNAL manufactured by Esselte. It is classified as a MRO (MRO_GENERAL).
What parts can replace 9019-1?
There are 12 known substitutes for 9019-1: 90191, ES1219-10, SS9094-001 and 9 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 9019-1?
9019-1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5999-00-835-2248. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9019-1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026