PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 9017DDS542-1
9017DDS542-1 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL OUTER RING, bore_shape: STRAIGHT, bore_diameter: 17.00 MILLIMETERS NOMINAL MM, load_direction: RADIAL, surface_finish: GROUND, inner_ring_width: 0.5470 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-198-2415, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
9017DDS542-1
NSN: 3110-00-198-2415
FSC: 3110
CAGE: 43991 — FAG BEARINGS CORPORATION (USA)
SPECIFICATIONS
materialSTEEL OUTER RING
bore_shapeSTRAIGHT
bore_diameter17.00 MILLIMETERS NOMINAL MM
seal_quantity2
load_directionRADIAL
surface_finishGROUND
inner_ring_width0.5470 INCHES NOMINAL IN
outer_ring_width0.5630 INCHES NOMINAL IN
special_featuresHEAT STABILIZED AT 175 DEG C DEGC
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
bearing_seal_typeCONTACT
lubrication_materialGREASE
NSN3110-00-198-2415
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 9017DDS542-1 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL QUANTITY: 2
•
BEARING SEAL TYPE: CONTACT
•
LUBRICATION MATERIAL: GREASE
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
SURFACE FINISH: GROUND
•
OUTER RING WIDTH: 0.5630 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
SEAL QUANTITY2
BEARING SEAL TYPECONTACT
LUBRICATION MATERIALGREASE
SEAL QUANTITY2
INTERNAL FIT-UP DESIGNATIONSTANDARD
SURFACE FINISHGROUND
OUTER RING WIDTH0.5630 INCHES NOMINAL IN
SPECIAL FEATURESHEAT STABILIZED AT 175 DEG C DEGC
STANDARD TOLERANCE DESIGNATIONABEC NO.1
SPECIAL FEATURESHEAT STABILIZED AT 175 DEG C DEGC
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
CR77051PC190Interchangeable
interchangeable cross-reference
interchangeable
55543Interchangeable
interchangeable cross-reference
interchangeable
001-30144Interchangeable
interchangeable cross-reference
interchangeable
5T5147Interchangeable
interchangeable cross-reference
interchangeable
MA1605Interchangeable
interchangeable cross-reference
interchangeable
PL P2-360 PART 1AInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 9017DDS542-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9017DDS542-1?
9017DDS542-1 is a BEARING,BALL,ANNULAR.
What parts can replace 9017DDS542-1?
There are 10 known substitutes for 9017DDS542-1: CR77051PC190, 55543, 001-30144 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 9017DDS542-1?
9017DDS542-1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-198-2415. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9017DDS542-1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026