PartsTable
Technical Data Sheet
Download PDF

901302 — ADJUSTER,SLACK,BRAKE

✓ Government record, cited
— · COMPONENT
PRODUCT OVERVIEW

901302: ADJUSTER,SLACK,BRAKE.

The ADJUSTER,SLACK,BRAKE is a the manufacturer industrial component. Key specifications include material: STEEL CASE, case_style: SQUARE, seal_width: 0.750 INCHES NOMINAL IN, temp_rating: -65.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF, housing_bore_diameter: 13.000 INCHES NOMINAL IN, sealing_element_style: ANGULAR-OPPOSED. This part is cataloged in the U.S.

Government catalog under NSN 2530-00-752-0907, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
901302
NSN: 2530-00-752-0907
NIINs: 007520907, 010356169, 013715008
FSC: 2530 — Vehicular Brake, Steering, Axle, Wheel, and Track Components
CAGE: 23705 — FRUEHAUF CORP (USA)
SPECIFICATIONS
materialSTEEL CASE
case_styleSQUARE
seal_width0.750 INCHES NOMINAL IN
temp_rating-65.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF
housing_bore_diameter13.000 INCHES NOMINAL IN
sealing_element_styleANGULAR-OPPOSED
accommodated_shaft_diameter11.000 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed3000 FEET PER MINUTE FT
NSN2530-00-752-0907
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available ADJUSTER,SLACK,BRAKE TITLE COMPONENT PN 901302 MFR ADJUSTER,SLACK,BRAKE
KEY FEATURES
•
FSC APPLICATION DATA: WHEEL,VEHICLE
•
CONNECTING ARM CENTER TO CENTER DISTANCE BETWEEN SPLINE HOLE AND CONNECTION HOLE: 5.500 INCHES NOMINAL AND 4.500 INCHES NOMINAL IN
•
SPLINE TYPE: STRAIGHT SPLINE
•
OFFSET DISTANCE: 0.625 INCHES NOMINAL IN
•
TORQUE LOAD RATING: 15000.000 INCH-POUNDS IN
•
CONNECTING ARM DESIGN: OFFSET
•
CONNECTING ARM HOLE QUANTITY: 2
•
OFFSET DIRECTION: LEFT
TECHNICAL CHARACTERISTICS
FSC APPLICATION DATAWHEEL,VEHICLE
CONNECTING ARM CENTER TO CENTER DISTANCE BETWEEN SPLINE HOLE AND CONNECTION HOLE5.500 INCHES NOMINAL AND 4.500 INCHES NOMINAL IN
SPLINE TYPESTRAIGHT SPLINE
OFFSET DISTANCE0.625 INCHES NOMINAL IN
TORQUE LOAD RATING15000.000 INCH-POUNDS IN
CONNECTING ARM DESIGNOFFSET
CONNECTING ARM HOLE QUANTITY2
OFFSET DIRECTIONLEFT
CONNECTING ARM HOLE BUSHINGINCLUDED
SHAPESTRAIGHT
SUBSTITUTES & CROSS-REFERENCES 3
7741201Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
7520907Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
929440Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy 901302?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 901302?
901302 is a ADJUSTER,SLACK,BRAKE.
What parts can replace 901302?
There are 3 known substitutes for 901302: 7741201, 7520907, 929440. Substitute compatibility should be verified for your specific system.
What is the NSN for 901302?
901302 is cataloged in the U.S. Government catalog under NSN 2530-00-752-0907. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 901302

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.