PartsTable
Technical Data Sheet
Download PDF

90127A011 — WASHER,SPRING TENSION

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

90127A011: WASHER,SPRING TENSION.

The WASHER,SPRING TENSION is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, hole_diameter: 0.200 INCHES NOMINAL IN, overall_height: 0.080 INCHES NOMINAL IN, hardness_rating: 40.0 ROCKWELL C MINIMUM, outside_diameter: 0.490 INCHES NOMINAL IN, special_features: SERRATED ON TOP ONLY. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-614-0061, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
90127A011
NSN: 5310-01-614-0061
FSC: 5310 — Nuts and Washers
CAGE: 39428 — MCMASTER-CARR SUPPLY CO (USA)
SPECIFICATIONS
materialSTEEL OVERALL
hole_diameter0.200 INCHES NOMINAL IN
overall_height0.080 INCHES NOMINAL IN
hardness_rating40.0 ROCKWELL C MINIMUM
outside_diameter0.490 INCHES NOMINAL IN
special_featuresSERRATED ON TOP ONLY
style_designatorSPRING TENSION
material_thickness0.050 INCHES NOMINAL IN
end_item_identificationPELORUS ASSY
NSN5310-01-614-0061
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 90127A011 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HARDNESS RATING: 40.0 ROCKWELL C MINIMUM
•
STYLE DESIGNATOR: SPRING TENSION
•
OUTSIDE DIAMETER: 0.490 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.050 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.080 INCHES NOMINAL IN
HARDNESS RATING40.0 ROCKWELL C MINIMUM
STYLE DESIGNATORSPRING TENSION
OUTSIDE DIAMETER0.490 INCHES NOMINAL IN
MATERIAL THICKNESS0.050 INCHES NOMINAL IN
SPECIAL FEATURESSERRATED ON TOP ONLY
END ITEM IDENTIFICATIONPELORUS ASSY
MATERIALSTEEL OVERALL
HOLE DIAMETER0.200 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 1
TM SG18-LR-MMA-020 7-33-10Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 90127A011?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 90127A011?
90127A011 is a WASHER,SPRING TENSION.
What parts can replace 90127A011?
There is 1 known substitute for 90127A011: TM SG18-LR-MMA-020 7-33-10. Substitute compatibility should be verified for your specific system.
What is the NSN for 90127A011?
90127A011 is cataloged in the U.S. Government catalog under NSN 5310-01-614-0061. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 90127A011