The BRACKET,ANGLE is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1015, first_leg_angle: 90.0 DEGREES NOMINAL, first_leg_style: SQUARE, first_leg_width: 0.547 INCHES MINIMUM AND 0.579 INCHES MAXIMUM IN, first_leg_length: 0.359 INCHES MINIMUM AND 0.391 INCHES MAXIMUM IN, second_leg_style: SQUARE. This part is cataloged in the U.S.
Government catalog under NSN 5340-00-839-2236, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
9012056
NSN:5340-00-839-2236 FSC:5340 — Hardware, Commercial CAGE:18876 — US ARMY AVIATION AND MISSILE COMMAND (USA)
SPECIFICATIONS
material
STEEL COMP 1015
first_leg_angle
90.0 DEGREES NOMINAL
first_leg_style
SQUARE
first_leg_width
0.547 INCHES MINIMUM AND 0.579 INCHES MAXIMUM IN
first_leg_length
0.359 INCHES MINIMUM AND 0.391 INCHES MAXIMUM IN
second_leg_style
SQUARE
second_leg_width
0.547 INCHES MINIMUM AND 0.579 INCHES MAXIMUM IN
style_designator
ANGLE
second_leg_length
0.531 INCHES MINIMUM AND 0.563 INCHES MAXIMUM IN
surface_treatment
ZINC
first_leg_thickness
0.016 INCHES MINIMUM AND 0.048 INCHES MAXIMUM IN
second_leg_thickness
0.016 INCHES MINIMUM AND 0.048 INCHES MAXIMUM IN
NSN
5340-00-839-2236
COMPONENT DIAGRAM
KEY FEATURES
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.156 INCHES MINIMUM AND 0.188 INCHES MAXIMUM IN
•
FIRST LEG ANGLE: 90.0 DEGREES NOMINAL
•
SECOND LEG RELATIONSHIP TO FIRST LEG: NOT IDENTICAL
•
SECOND LEG HOLE DIAMETER: 0.129 INCHES MINIMUM AND 0.132 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-Z-325,TYPE 2 FED SPEC SINGLE TREATMENT RESPONSE
•
SECOND LEG WIDTH: 0.547 INCHES MINIMUM AND 0.579 INCHES MAXIMUM IN
•
SECOND LEG LENGTH: 0.531 INCHES MINIMUM AND 0.563 INCHES MAXIMUM IN
•
FIRST LEG HOLE ARRANGEMENT STYLE: NO HOLE
TECHNICAL CHARACTERISTICS
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH
0.156 INCHES MINIMUM AND 0.188 INCHES MAXIMUM IN
FIRST LEG ANGLE
90.0 DEGREES NOMINAL
SECOND LEG RELATIONSHIP TO FIRST LEG
NOT IDENTICAL
SECOND LEG HOLE DIAMETER
0.129 INCHES MINIMUM AND 0.132 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
QQ-Z-325,TYPE 2 FED SPEC SINGLE TREATMENT RESPONSE
SECOND LEG WIDTH
0.547 INCHES MINIMUM AND 0.579 INCHES MAXIMUM IN
SECOND LEG LENGTH
0.531 INCHES MINIMUM AND 0.563 INCHES MAXIMUM IN
FIRST LEG HOLE ARRANGEMENT STYLE
NO HOLE
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH
0.265 INCHES MINIMUM AND 0.297 INCHES MAXIMUM IN
STYLE DESIGNATOR
ANGLE
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9012056?
9012056 is a BRACKET,ANGLE.
What is the NSN for 9012056?
9012056 is cataloged in the U.S. Government catalog under NSN 5340-00-839-2236. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.