The BRACKET,ANGLE is a the manufacturer industrial component. Key specifications include heat_treatment: T-4 SOLUTION HEAT TREATED, first_leg_angle: 90.0 DEGREES NOMINAL, first_leg_style: CORNER RADIUS, first_leg_width: 0.797 INCHES MINIMUM AND 0.828 INCHES MAXIMUM IN, first_leg_length: 1.109 INCHES MINIMUM AND 1.141 INCHES MAXIMUM IN, second_leg_style: CORNER RADIUS. This part is cataloged in the U.S.
Government catalog under NSN 5340-00-725-2995, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
9012030
NSN:5340-00-725-2995 FSC:5340 — Hardware, Commercial CAGE:18876 — US ARMY AVIATION AND MISSILE COMMAND (USA)
SPECIFICATIONS
heat_treatment
T-4 SOLUTION HEAT TREATED
first_leg_angle
90.0 DEGREES NOMINAL
first_leg_style
CORNER RADIUS
first_leg_width
0.797 INCHES MINIMUM AND 0.828 INCHES MAXIMUM IN
first_leg_length
1.109 INCHES MINIMUM AND 1.141 INCHES MAXIMUM IN
second_leg_style
CORNER RADIUS
second_leg_width
0.797 INCHES MINIMUM AND 0.828 INCHES MAXIMUM IN
special_features
THREADED HOLES IN SECOND LEG
style_designator
ANGLE
second_leg_length
0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN
surface_treatment
ANODIZE
first_leg_thickness
0.109 INCHES MINIMUM AND 0.141 INCHES MAXIMUM IN
NSN
5340-00-725-2995
COMPONENT DIAGRAM
KEY FEATURES
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM IN
•
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM IN
•
FIRST LEG HOLE DIAMETER: 0.192 INCHES MINIMUM AND 0.203 INCHES MAXIMUM IN
•
FIRST LEG ANGLE: 90.0 DEGREES NOMINAL
•
SECOND LEG HOLE DIAMETER: 0.138 INCHES NOMINAL IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE
•
FIRST LEG CORNER RADIUS: 0.125 INCHES NOMINAL IN
•
SECOND LEG WIDTH: 0.797 INCHES MINIMUM AND 0.828 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH
0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM IN
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH
0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM IN
FIRST LEG HOLE DIAMETER
0.192 INCHES MINIMUM AND 0.203 INCHES MAXIMUM IN
FIRST LEG ANGLE
90.0 DEGREES NOMINAL
SECOND LEG HOLE DIAMETER
0.138 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE
FIRST LEG CORNER RADIUS
0.125 INCHES NOMINAL IN
SECOND LEG WIDTH
0.797 INCHES MINIMUM AND 0.828 INCHES MAXIMUM IN
SECOND LEG LENGTH
0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN
FIRST LEG HOLE ARRANGEMENT STYLE
ONE HOLE
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9012030?
9012030 is a BRACKET,ANGLE.
What is the NSN for 9012030?
9012030 is cataloged in the U.S. Government catalog under NSN 5340-00-725-2995. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.