PartsTable
Technical Data Sheet
PartsTable / MRO / 90117-1
90117-1 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

RESISTOR,VARIABLE,WIRE WOUND,PRE. Key specifications include special_features: ANALOG, end_item_identification: 90-315 INTERNAL COMMUNICATIONS SYSTEM; ASTUTE SUBMARINE. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-011-0499, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 90117-1
NSN: 5305-00-011-0499
FSC: 5305
CAGE: 92392 — ALLIS-CHALMERS CORP (USA)
SPECIFICATIONS
special_featuresANALOG
end_item_identification90-315 INTERNAL COMMUNICATIONS SYSTEM; ASTUTE SUBMARINE
NSN5305-00-011-0499
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 90117-1 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD QUANTITY PER INCH: 24
•
THREAD DIRECTION: RIGHT-HAND
•
HEAD HEIGHT: 0.123 INCHES MINIMUM AND 0.137 INCHES MAXIMUM IN
•
HEAD DIAMETER: 0.334 INCHES MINIMUM AND 0.359 INCHES MAXIMUM IN
•
HEAD STYLE: ROUND
•
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 1S STYLE
•
THREAD CLASS: 2A A
•
THREAD LENGTH: 0.375 INCHES MINIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
THREAD QUANTITY PER INCH24
THREAD DIRECTIONRIGHT-HAND
HEAD HEIGHT0.123 INCHES MINIMUM AND 0.137 INCHES MAXIMUM IN
HEAD DIAMETER0.334 INCHES MINIMUM AND 0.359 INCHES MAXIMUM IN
HEAD STYLEROUND
NONDEFINITIVE SPEC/STD DATA1 TYPE AND 1S STYLE
THREAD CLASS2A A
THREAD LENGTH0.375 INCHES MINIMUM IN
NOMINAL THREAD DIAMETER0.190 INCHES IN
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
VERIFIED SUBSTITUTES & CROSS-REFERENCES 23
GGG-P-836 TY1CL1Interchangeable
interchangeable cross-reference
interchangeable
GGG-P-836Interchangeable
interchangeable cross-reference
interchangeable
730-13/16Interchangeable
interchangeable cross-reference
interchangeable
740Interchangeable
interchangeable cross-reference
interchangeable
0043012Interchangeable
interchangeable cross-reference
interchangeable
20-668Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 90117-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 90117-1?
90117-1 is a RESISTOR,VARIABLE,WIRE WOUND,PRE. It is classified as a MRO (MRO_GENERAL).
What parts can replace 90117-1?
There are 23 known substitutes for 90117-1: GGG-P-836 TY1CL1, GGG-P-836, 730-13/16 and 20 more. Substitute compatibility should be verified for your specific system.
Is 90117-1 still available?
90117-1 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 90117-1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026