PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 901-3104
901-3104 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The BRACKET,ANGLE is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING, first_leg_angle: 102.0 DEGREES NOMINAL, first_leg_style: ANGLE, first_leg_length: 1.150 INCHES NOMINAL IN, second_leg_style: SQUARE, second_leg_width: 1.400 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-086-1520, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
901-3104
NSN: 5340-01-086-1520
FSC: 5340
CAGE: 4Z9A3 — DIAGNOSTIC SOLUTIONS INTERNATIONAL LLC DBA DIAGNOSTIC SOLUTIONS (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING
first_leg_angle102.0 DEGREES NOMINAL
first_leg_styleANGLE
first_leg_length1.150 INCHES NOMINAL IN
second_leg_styleSQUARE
second_leg_width1.400 INCHES NOMINAL IN
style_designatorOFFSET ANGLE
second_leg_length1.350 INCHES NOMINAL IN
surface_treatmentPASSIVATE
first_leg_thickness0.0625 INCHES NOMINAL IN
second_leg_thickness0.0625 INCHES NOMINAL IN
first_leg_hole_diameter0.266 INCHES NOMINAL IN
NSN5340-01-086-1520
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 901-3104 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST LEG HOLE ARRANGEMENT STYLE: TWO HOLES
•
FIRST LEG ANGLE: 102.0 DEGREES NOMINAL
•
SECOND LEG LENGTH: 1.350 INCHES NOMINAL IN
•
SURFACE TREATMENT: PASSIVATE
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH: 0.950 INCHES NOMINAL IN
•
SECOND LEG THICKNESS: 0.0625 INCHES NOMINAL IN
•
FIRST LEG THICKNESS: 0.0625 INCHES NOMINAL IN
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.440 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
FIRST LEG HOLE ARRANGEMENT STYLETWO HOLES
FIRST LEG ANGLE102.0 DEGREES NOMINAL
SECOND LEG LENGTH1.350 INCHES NOMINAL IN
SURFACE TREATMENTPASSIVATE
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH0.950 INCHES NOMINAL IN
SECOND LEG THICKNESS0.0625 INCHES NOMINAL IN
FIRST LEG THICKNESS0.0625 INCHES NOMINAL IN
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.440 INCHES NOMINAL IN
FIRST LEG STYLEANGLE
SECOND LEG RELATIONSHIP TO FIRST LEGNOT IDENTICAL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
327019Interchangeable
interchangeable cross-reference
interchangeable
173513Interchangeable
interchangeable cross-reference
interchangeable
191006Interchangeable
interchangeable cross-reference
interchangeable
A3104Interchangeable
interchangeable cross-reference
interchangeable
T773Interchangeable
interchangeable cross-reference
interchangeable
10557403-6Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 901-3104?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 901-3104?
901-3104 is a BRACKET,ANGLE.
What parts can replace 901-3104?
There are 7 known substitutes for 901-3104: 327019, 173513, 191006 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 901-3104?
901-3104 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-086-1520. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 901-3104

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026