PartsTable
Technical Data Sheet
Download PDF

90097A130 — WASHER,FLAT

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

90097A130: WASHER,FLAT.

The WASHER,FLAT is a the manufacturer industrial component. Key specifications include material: PLASTIC NYLON OVERALL, hole_diameter: 0.138 INCHES NOMINAL IN, special_features: WASHER, COLLAR, NYLON NO.6, peripheral_shape_style: ROUND, center_hole_shape_style: ROUND, end_item_identification: M871A322.5 TON SEMI-TRAILER SYSTEM. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-504-6472, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
90097A130
NSN: 5310-01-504-6472
FSC: 5310 — Nuts and Washers
CAGE: 39428 — MCMASTER-CARR SUPPLY CO (USA)
SPECIFICATIONS
materialPLASTIC NYLON OVERALL
hole_diameter0.138 INCHES NOMINAL IN
special_featuresWASHER, COLLAR, NYLON NO.6
peripheral_shape_styleROUND
center_hole_shape_styleROUND
end_item_identificationM871A322.5 TON SEMI-TRAILER SYSTEM
NSN5310-01-504-6472
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 90097A130 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PERIPHERAL SHAPE STYLE: ROUND
•
MATERIAL: PLASTIC NYLON OVERALL
•
CENTER HOLE SHAPE STYLE: ROUND
•
HOLE DIAMETER: 0.138 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
SPECIAL FEATURESWASHER, COLLAR, NYLON NO.6
PERIPHERAL SHAPE STYLEROUND
END ITEM IDENTIFICATIONM871A322.5 TON SEMI-TRAILER SYSTEM
MATERIALPLASTIC NYLON OVERALL
CENTER HOLE SHAPE STYLEROUND
HOLE DIAMETER0.138 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 1
0F51-0597-00Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 90097A130?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 90097A130?
90097A130 is a WASHER,FLAT.
What parts can replace 90097A130?
There is 1 known substitute for 90097A130: 0F51-0597-00. Substitute compatibility should be verified for your specific system.
What is the NSN for 90097A130?
90097A130 is cataloged in the U.S. Government catalog under NSN 5310-01-504-6472. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 90097A130

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.