PartsTable
Technical Data Sheet
PartsTable / MRO / 90092
90092 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The VALVE,VACUUM BREAKING is a the manufacturer industrial component. Key specifications include material: STEEL SEAT, body_style: SINGLE CONNECTION, STRAIGHT FLOW, body_width: 0.594 INCHES NOMINAL IN, body_height: 1.125 INCHES NOMINAL IN, body_length: 0.875 INCHES NOMINAL IN, bushing_length: 0.875 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-169-1947, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 90092
NSN: 5330-00-169-1947
FSC: 5330
CAGE: 04579 — AURORA PUMP A UNIT OF GENERAL SIGNAL CORP (USA)
SPECIFICATIONS
materialSTEEL SEAT
body_styleSINGLE CONNECTION, STRAIGHT FLOW
body_width0.594 INCHES NOMINAL IN
body_height1.125 INCHES NOMINAL IN
body_length0.875 INCHES NOMINAL IN
bushing_length0.875 INCHES NOMINAL IN
inclosure_typeFULLY INCLOSED
terminal_width0.050 INCHES NOMINAL IN
actuator_height0.375 INCHES NOMINAL IN
terminal_length0.155 INCHES MAXIMUM IN
special_featuresRESISTOR, CHIP, ZERO-OHM, STYLE RM1505
actuator_diameter0.473 INCHES NOMINAL IN
NSN5330-00-169-1947
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 90092 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
374034C91Interchangeable
interchangeable cross-reference
interchangeable
79Z40Interchangeable
interchangeable cross-reference
interchangeable
90092Interchangeable
interchangeable cross-reference
interchangeable
P92-3835.1PSIGInterchangeable
interchangeable cross-reference
interchangeable
90092JInterchangeable
interchangeable cross-reference
interchangeable
H1505CPX000(DEC092)Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 90092?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 90092?
90092 is a VALVE,VACUUM BREAKING. It is classified as a MRO (MRO_GENERAL).
What parts can replace 90092?
There are 8 known substitutes for 90092: 374034C91, 79Z40, 90092 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 90092?
90092 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-169-1947. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 90092

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026