PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 900729-4
900729-4 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.406 INCHES NOMINAL IN, material: STEEL BAND, slot_width: 0.406 INCHES NOMINAL IN, slot_length: 0.500 INCHES NOMINAL IN, overall_width: 0.750 INCHES NOMINAL IN, style_designator: SINGLE LOOP. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-764-5231, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
900729-4
NSN: 5340-00-764-5231
FSC: 5340
CAGE: 01276 — DANFOSS POWER SOLUTIONS II, LLC (USA)
SPECIFICATIONS
diameter0.406 INCHES NOMINAL IN
materialSTEEL BAND
slot_width0.406 INCHES NOMINAL IN
slot_length0.500 INCHES NOMINAL IN
overall_width0.750 INCHES NOMINAL IN
style_designatorSINGLE LOOP
surface_treatmentCADMIUM BAND
material_thickness0.050 INCHES NOMINAL IN
loop_inside_diameter0.750 INCHES NOMINAL IN
cushioning_environmental_protectionHEAT
distance_from_loop_center_to_tongue_end1.440 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.940 INCHES NOMINAL IN
NSN5340-00-764-5231
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 900729-4 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL BAND
•
MATERIAL THICKNESS: 0.050 INCHES NOMINAL IN
•
STYLE DESIGNATOR: SINGLE LOOP
•
LOOP INSIDE DIAMETER: 0.750 INCHES NOMINAL IN
•
SLOT WIDTH: 0.406 INCHES NOMINAL IN
•
CUSHIONING ENVIRONMENTAL PROTECTION: HEAT
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL BAND
MATERIAL THICKNESS0.050 INCHES NOMINAL IN
STYLE DESIGNATORSINGLE LOOP
LOOP INSIDE DIAMETER0.750 INCHES NOMINAL IN
SLOT WIDTH0.406 INCHES NOMINAL IN
OVERALL WIDTH0.750 INCHES NOMINAL IN
CUSHIONING ENVIRONMENTAL PROTECTIONHEAT
MATERIALRUBBER SYNTHETIC CUSHION
DIAMETER0.406 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.940 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
6510NCM116271Upgraded Successor
successor cross-reference
successor
23682Upgraded Successor
successor cross-reference
successor
8450Upgraded Successor
successor cross-reference
successor
D4524-5557-1Interchangeable
interchangeable cross-reference
interchangeable
G25P7468Interchangeable
interchangeable cross-reference
interchangeable
373MS023P001Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 900729-4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 900729-4?
900729-4 is a CLAMP,LOOP.
What parts can replace 900729-4?
There are 9 known substitutes for 900729-4: 6510NCM116271, 23682, 8450 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 900729-4?
900729-4 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-764-5231. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 900729-4

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026