PartsTable
Technical Data Sheet
Download PDF

9005912 — CAP PULLEY

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

9005912: CAP PULLEY.

The CAP PULLEY is a the manufacturer industrial component. Key specifications include hole_diameter: 0.096 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 0.812 INCHES NOMINAL IN, aperture_width: 0.562 INCHES NOMINAL IN, overall_length: 1.625 INCHES NOMINAL IN, aperture_length: 1.125 INCHES NOMINAL IN, hardness_rating: 45.0 SHORE DUROMETER A MINIMUM AND 55.0 SHORE DUROMETER A MAXIMUM OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-628-1616, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 9005912
NSN: 5330-00-628-1616
NIINs: 006281616, 009927224
FSC: 5330 — Packing and Gasket Materials
CAGE: 18876 — US ARMY AVIATION AND MISSILE COMMAND (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OR RUBBER POLYESTER URETHANE CLASS AU OR RUBBER POLYETHER URETHANE CLASS EU OVERALL
hole_diameter0.096 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width0.812 INCHES NOMINAL IN
aperture_width0.562 INCHES NOMINAL IN
overall_length1.625 INCHES NOMINAL IN
aperture_length1.125 INCHES NOMINAL IN
hardness_rating45.0 SHORE DUROMETER A MINIMUM AND 55.0 SHORE DUROMETER A MAXIMUM OVERALL
style_designatorNON-CIRCULAR
bolt_hole_quantity2
inside_corner_radius0.125 INCHES NOMINAL IN
outside_corner_radius0.125 INCHES NOMINAL IN
cross-sectional_thickness0.032 INCHES NOMINAL IN
NSN5330-00-628-1616
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 9005912 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.032 INCHES NOMINAL IN
•
INSIDE CORNER RADIUS: 0.125 INCHES NOMINAL IN
•
HARDNESS RATING: 45.0 SHORE DUROMETER A MINIMUM AND 55.0 SHORE DUROMETER A MAXIMUM OVERALL
•
STYLE DESIGNATOR: NON-CIRCULAR
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM D2000 2BG51SF1 ASSN STD ALL MATERIAL RESPONSES OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.032 INCHES NOMINAL IN
INSIDE CORNER RADIUS0.125 INCHES NOMINAL IN
HARDNESS RATING45.0 SHORE DUROMETER A MINIMUM AND 55.0 SHORE DUROMETER A MAXIMUM OVERALL
STYLE DESIGNATORNON-CIRCULAR
MATERIAL DOCUMENT AND CLASSIFICATIONASTM D2000 2BG51SF1 ASSN STD ALL MATERIAL RESPONSES OVERALL
OVERALL LENGTH1.625 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OVERALL WIDTH0.812 INCHES NOMINAL IN
APERTURE WIDTH0.562 INCHES NOMINAL IN
APERTURE LENGTH1.125 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 9005912?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9005912?
9005912 is a CAP PULLEY. It is classified as a MRO (MRO_GENERAL).
What is the NSN for 9005912?
9005912 is cataloged in the U.S. Government catalog under NSN 5330-00-628-1616. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9005912

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.