PartsTable
Technical Data Sheet
Download PDF

9002827 — CATCH,CLAMPING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

9002827: CATCH,CLAMPING.

The CATCH,CLAMPING is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING CATCH, hole_diameter: 0.115 INCHES MINIMUM AND 0.170 INCHES MAXIMUM IN, overall_width: 1.500 INCHES NOMINAL IN, overall_height: 0.609 INCHES NOMINAL IN, overall_length: 2.125 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-611-7130, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
9002827
NSN: 5340-00-611-7130
FSC: 5340 — Hardware, Commercial
CAGE: 18876 — US ARMY AVIATION AND MISSILE COMMAND (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING CATCH
hole_diameter0.115 INCHES MINIMUM AND 0.170 INCHES MAXIMUM IN
hole_quantity3
overall_width1.500 INCHES NOMINAL IN
overall_height0.609 INCHES NOMINAL IN
overall_length2.125 INCHES NOMINAL IN
NSN5340-00-611-7130
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 9002827 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: ALUMINUM ALLOY COVER
•
HOLE QUANTITY: 3
•
HOLE DIAMETER: 0.115 INCHES MINIMUM AND 0.170 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.609 INCHES NOMINAL IN
OVERALL LENGTH2.125 INCHES NOMINAL IN
OVERALL WIDTH1.500 INCHES NOMINAL IN
MATERIALALUMINUM ALLOY COVER
MATERIALSTEEL CORROSION RESISTING CATCH
HOLE QUANTITY3
HOLE DIAMETER0.115 INCHES MINIMUM AND 0.170 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 9002827?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9002827?
9002827 is a CATCH,CLAMPING.
What is the NSN for 9002827?
9002827 is cataloged in the U.S. Government catalog under NSN 5340-00-611-7130. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9002827