PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 900264
900264 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SPACER BODY is a the manufacturer industrial component. Key specifications include criticality_code_justification: ZZZY, reference_number_differentiating_characteristics: CLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-050-0036, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
900264
NSN: 5330-00-050-0036
FSC: 5330
CAGE: 58275 — SASCO INC CANADIAN DIV
SPECIFICATIONS
criticality_code_justificationZZZY
reference_number_differentiating_characteristicsCLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
NSN5330-00-050-0036
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 900264 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 1600 FEET PER MINUTE FT
•
ACCOMMODATED SHAFT DIAMETER: 1.250 INCHES NOMINAL IN
•
HOUSING BORE DIAMETER: 1.999 INCHES MINIMUM AND 2.001 INCHES MAXIMUM IN
•
SEALING ELEMENT STYLE: ANGULAR
•
MATERIAL: STEEL CASE
•
CASE STYLE: SQUARE
•
SEAL WIDTH: 0.423 INCHES MINIMUM AND 0.453 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
ACCOMMODATED SHAFT MAXIMUM RATED SPEED1600 FEET PER MINUTE FT
ACCOMMODATED SHAFT DIAMETER1.250 INCHES NOMINAL IN
HOUSING BORE DIAMETER1.999 INCHES MINIMUM AND 2.001 INCHES MAXIMUM IN
SEALING ELEMENT STYLEANGULAR
MATERIALSTEEL CASE
CASE STYLESQUARE
MATERIALLEATHER AND RUBBER SYNTHETIC SEALING ELEMENT
SEAL WIDTH0.423 INCHES MINIMUM AND 0.453 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 24
RE49F377Interchangeable
interchangeable cross-reference
interchangeable
RE49F377REVJInterchangeable
interchangeable cross-reference
interchangeable
UG254AUInterchangeable
interchangeable cross-reference
interchangeable
900264Interchangeable
interchangeable cross-reference
interchangeable
900264CPInterchangeable
interchangeable cross-reference
interchangeable
M1154Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 900264?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 900264?
900264 is a SPACER BODY.
What parts can replace 900264?
There are 24 known substitutes for 900264: RE49F377, RE49F377REVJ, UG254AU and 21 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 900264?
900264 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-050-0036. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 900264

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026