PartsTable
Technical Data Sheet
PartsTable / MRO / 90014
90014 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,ROLLER,CYLINDRICAL is a the manufacturer industrial component. Key specifications include material: STEEL OR COPPER ALLOY RETAINER, bore_shape: STRAIGHT, bore_diameter: 1.1240 INCHES MINIMUM AND 1.1250 INCHES MAXIMUM IN, overall_width: 0.8020 INCHES MINIMUM AND 0.8120 INCHES MAXIMUM IN, surface_finish: GROUND, locating_feature: NONLOCATING. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-679-5839, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 90014
NSN: 3110-00-679-5839
FSC: 3110
CAGE: 93334 — ATWOOD FENCE CO INC (USA)
SPECIFICATIONS
materialSTEEL OR COPPER ALLOY RETAINER
bore_shapeSTRAIGHT
bore_diameter1.1240 INCHES MINIMUM AND 1.1250 INCHES MAXIMUM IN
overall_width0.8020 INCHES MINIMUM AND 0.8120 INCHES MAXIMUM IN
surface_finishGROUND
locating_featureNONLOCATING
special_featuresBRASS,BLACK OXIDE FINISH; 0.406 IN. O/A DIA IN
style_designatorSINGLE ROW, NON-LOCATING, TWO LIP INNER RING, CYLINDRICAL OUTER RING, SEPARABLE
end_item_identificationRSA II A UPGRADE VIA ECP'S ER13-6 AND WR6-5
overall_outside_diameter1.6860 INCHES MINIMUM AND 1.6870 INCHES MAXIMUM IN
internal_fit-up_designationSTANDARD
NSN3110-00-679-5839
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 90014 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL OUTSIDE DIAMETER: 1.6860 INCHES MINIMUM AND 1.6870 INCHES MAXIMUM IN
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
BORE DIAMETER: 1.1240 INCHES MINIMUM AND 1.1250 INCHES MAXIMUM IN
•
SURFACE FINISH: GROUND
•
MATERIAL: STEEL OUTER RING
•
LOCATING FEATURE: NONLOCATING
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL OUTSIDE DIAMETER1.6860 INCHES MINIMUM AND 1.6870 INCHES MAXIMUM IN
INTERNAL FIT-UP DESIGNATIONSTANDARD
BORE DIAMETER1.1240 INCHES MINIMUM AND 1.1250 INCHES MAXIMUM IN
SURFACE FINISHGROUND
MATERIALSTEEL OUTER RING
OVERALL WIDTH0.8020 INCHES MINIMUM AND 0.8120 INCHES MAXIMUM IN
LOCATING FEATURENONLOCATING
MATERIALSTEEL ROLLER
STYLE DESIGNATORSINGLE ROW, NON-LOCATING, TWO LIP INNER RING, CYLINDRICAL OUTER RING, SEPARABLE
MATERIALSTEEL INNER RING
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
950051-0002-000Interchangeable
interchangeable cross-reference
interchangeable
911406-0014-000Interchangeable
interchangeable cross-reference
interchangeable
900-14Interchangeable
interchangeable cross-reference
interchangeable
9001-1Interchangeable
interchangeable cross-reference
interchangeable
BJ20495Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 90014?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 90014?
90014 is a BEARING,ROLLER,CYLINDRICAL. It is classified as a MRO (MRO_GENERAL).
What parts can replace 90014?
There are 5 known substitutes for 90014: 950051-0002-000, 911406-0014-000, 900-14 and 2 more. Substitute compatibility should be verified for your specific system.
Is 90014 still available?
90014 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 90014

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026