PartsTable
Technical Data Sheet
Download PDF

9001-335 — SYNCHRO,TRANSMITTER

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

9001-335: SYNCHRO,TRANSMITTER.

The SYNCHRO,TRANSMITTER is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1212 OVERALL, body_size: 20, nut_style: HEXAGON, body_style: PICK-OFF A, nut_height: 0.375 INCHES NOMINAL IN, thread_class: 2B. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-483-8835, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
9001-335
NSN: 5310-00-483-8835
NIINs: 004838835, 006754567, 012509595
FSC: 5310 — Nuts and Washers
CAGE: 18876 — US ARMY AVIATION AND MISSILE COMMAND (USA)
SPECIFICATIONS
materialSTEEL COMP 1212 OVERALL
body_size20
nut_styleHEXAGON
body_stylePICK-OFF A
nut_height0.375 INCHES NOMINAL IN
thread_class2B
body_diameter2.0000 INCHES NOMINAL IN
body_materialSTEEL CORROSION RESISTING
thread_seriesUNF
overall_length0.8500 INCHES NOMINAL IN
fragility_factorMODERATELY RUGGED
special_featuresLEADS 15 IN. MIN LG IN
NSN5310-00-483-8835
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 9001-335 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.688 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-Z-325,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
THREAD SERIES: UNF
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-637 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.438 INCHES IN
•
NUT HEIGHT: 0.375 INCHES NOMINAL IN
•
SURFACE TREATMENT: ZINC OVERALL
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.688 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-Z-325,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD SERIESUNF
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-637 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.438 INCHES IN
NUT HEIGHT0.375 INCHES NOMINAL IN
SURFACE TREATMENTZINC OVERALL
NUT STYLEHEXAGON
THREAD CLASS2B
SUBSTITUTES & CROSS-REFERENCES 1
G205465-15Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 9001-335?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9001-335?
9001-335 is a SYNCHRO,TRANSMITTER.
What parts can replace 9001-335?
There is 1 known substitute for 9001-335: G205465-15. Substitute compatibility should be verified for your specific system.
What is the NSN for 9001-335?
9001-335 is cataloged in the U.S. Government catalog under NSN 5310-00-483-8835. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9001-335

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.