PartsTable
Technical Data Sheet
Download PDF

90009-8 — CRIMPING TOOL,TERMINAL,HAND

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

90009-8: CRIMPING TOOL,TERMINAL,HAND.

The CRIMPING TOOL,TERMINAL,HAND is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY, hole_diameter: 0.156 INCHES NOMINAL IN, inside_height: 0.313 INCHES NOMINAL IN, inside_length: 0.750 INCHES NOMINAL IN, outside_width: 0.438 INCHES NOMINAL IN, painted_feature: NOT INCLUDED. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-663-2996, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
90009-8
NSN: 5340-00-663-2996
NIINs: 006632996, 013397071
FSC: 5340 — Hardware, Commercial
CAGE: 97499 — BELL TEXTRON INC (USA)
SPECIFICATIONS
materialCOPPER ALLOY
hole_diameter0.156 INCHES NOMINAL IN
inside_height0.313 INCHES NOMINAL IN
inside_length0.750 INCHES NOMINAL IN
outside_width0.438 INCHES NOMINAL IN
painted_featureNOT INCLUDED
style_designatorFOOTMANS LOOP
surface_treatmentCADMIUM
center_to_center_distance_between_holes1.625 INCHES NOMINAL IN
NSN5340-00-663-2996
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 90009-8 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INSIDE LENGTH: 0.750 INCHES NOMINAL IN
•
STYLE DESIGNATOR: FOOTMANS LOOP
•
PAINTED FEATURE: NOT INCLUDED
•
CENTER TO CENTER DISTANCE BETWEEN HOLES: 1.625 INCHES NOMINAL IN
•
OUTSIDE WIDTH: 0.438 INCHES NOMINAL IN
•
SURFACE TREATMENT: CADMIUM
•
MATERIAL: COPPER ALLOY
•
INSIDE HEIGHT: 0.313 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
INSIDE LENGTH0.750 INCHES NOMINAL IN
STYLE DESIGNATORFOOTMANS LOOP
PAINTED FEATURENOT INCLUDED
CENTER TO CENTER DISTANCE BETWEEN HOLES1.625 INCHES NOMINAL IN
OUTSIDE WIDTH0.438 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM
MATERIALCOPPER ALLOY
INSIDE HEIGHT0.313 INCHES NOMINAL IN
HOLE DIAMETER0.156 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 2
555Reference document
Same NSN cross-reference
Reference document — Secondary reference
90-009-1Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 90009-8?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 90009-8?
90009-8 is a CRIMPING TOOL,TERMINAL,HAND.
What parts can replace 90009-8?
There are 2 known substitutes for 90009-8: 555, 90-009-1. Substitute compatibility should be verified for your specific system.
What is the NSN for 90009-8?
90009-8 is cataloged in the U.S. Government catalog under NSN 5340-00-663-2996. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 90009-8

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.