The MICROCIRCUIT,DIGITAL is a the manufacturer industrial component. Key specifications include body_width: 0.220 INCHES MINIMUM AND 0.310 INCHES MAXIMUM IN, body_height: 0.140 INCHES MINIMUM AND 0.185 INCHES MAXIMUM IN, body_length: 0.840 INCHES MAXIMUM IN, output_logic_form: TRANSISTOR-TRANSISTOR LOGIC, inclosure_material: CERAMIC AND GLASS, storage_temp_range: -65.0 TO 150.0 CELSIUS DEGC. This part is cataloged in the Federal Logistics Information System under NSN 5962-01-058-4418, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
| body_width | 0.220 INCHES MINIMUM AND 0.310 INCHES MAXIMUM IN |
| body_height | 0.140 INCHES MINIMUM AND 0.185 INCHES MAXIMUM IN |
| body_length | 0.840 INCHES MAXIMUM IN |
| features_provided | HERMETICALLY SEALED AND MONOLITHIC AND POSITIVE OUTPUTS AND W/ENABLE AND RESETTABLE AND HIGH SPEED AND W/STORAGE AND TRUE/COMPLEMENTARY AND W/CLEAR AND ASYNCHRONOUS |
| output_logic_form | TRANSISTOR-TRANSISTOR LOGIC |
| inclosure_material | CERAMIC AND GLASS |
| storage_temp_range | -65.0 TO 150.0 CELSIUS DEGC |
| operating_temp_range | -55.0 TO 125.0 CELSIUS DEGC |
| input_circuit_pattern | 10 INPUT |
| inclosure_configuration | DUAL-IN-LINE |
| terminal_surface_treatment | SOLDER |
| specification/standard_data | 81349-MIL-M-38510/159 GOVERNMENT SPECIFICATION |
| NSN | 5962-01-058-4418 |
| INPUT CIRCUIT PATTERN | 10 INPUT |
| OPERATING TEMP RANGE | -55.0 TO 125.0 CELSIUS DEGC |
| INCLOSURE CONFIGURATION | DUAL-IN-LINE |
| INCLOSURE MATERIAL | CERAMIC AND GLASS |
| TEST DATA DOCUMENT | 81349-MIL-M-38510 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| CASE OUTLINE SOURCE AND DESIGNATOR | D-2 MIL-M-38510 |
| BODY WIDTH | 0.220 INCHES MINIMUM AND 0.310 INCHES MAXIMUM IN |
| DESIGN FUNCTION AND QUANTITY | 2 SHIFT REGISTER |
| TERMINAL SURFACE TREATMENT | SOLDER |
| VOLTAGE RATING AND TYPE PER CHARACTERISTIC | 5.5 VOLTS MAXIMUM POWER SOURCE |