PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 900-63-9-0102-03
900-63-9-0102-03 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: STEEL CASE, case_style: SQUARE, seal_width: 0.406 INCHES MINIMUM AND 0.469 INCHES MAXIMUM IN, housing_bore_diameter: 1.828 INCHES NOMINAL IN, sealing_element_style: ANGULAR, accommodated_shaft_diameter: 0.781 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-291-9631, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
900-63-9-0102-03
NSN: 5330-00-291-9631
FSC: 5330
CAGE: 58626 — FULLER CO COMPTON PLANT (USA)
SPECIFICATIONS
materialSTEEL CASE
case_styleSQUARE
seal_width0.406 INCHES MINIMUM AND 0.469 INCHES MAXIMUM IN
housing_bore_diameter1.828 INCHES NOMINAL IN
sealing_element_styleANGULAR
accommodated_shaft_diameter0.781 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed2000 FEET PER MINUTE FT
NSN5330-00-291-9631
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 900-63-9-0102-03 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEALING ELEMENT STYLE: ANGULAR
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
•
HOUSING BORE DIAMETER: 1.828 INCHES NOMINAL IN
•
CASE STYLE: SQUARE
•
ACCOMMODATED SHAFT DIAMETER: 0.781 INCHES NOMINAL IN
•
MATERIAL: STEEL CASE
•
SEAL WIDTH: 0.406 INCHES MINIMUM AND 0.469 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
SEALING ELEMENT STYLEANGULAR
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
HOUSING BORE DIAMETER1.828 INCHES NOMINAL IN
CASE STYLESQUARE
ACCOMMODATED SHAFT DIAMETER0.781 INCHES NOMINAL IN
MATERIALSTEEL CASE
SEAL WIDTH0.406 INCHES MINIMUM AND 0.469 INCHES MAXIMUM IN
MATERIALLEATHER SEALING ELEMENT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
240-1115-00Interchangeable
interchangeable cross-reference
interchangeable
18-325Interchangeable
interchangeable cross-reference
interchangeable
50034Interchangeable
interchangeable cross-reference
interchangeable
VR2-4CE6Interchangeable
interchangeable cross-reference
interchangeable
SC-C-69992-13Interchangeable
interchangeable cross-reference
interchangeable
05003-04NInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 900-63-9-0102-03?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 900-63-9-0102-03?
900-63-9-0102-03 is a SEAL,PLAIN ENCASED.
What parts can replace 900-63-9-0102-03?
There are 17 known substitutes for 900-63-9-0102-03: 240-1115-00, 18-325, 50034 and 14 more. Substitute compatibility should be verified for your specific system.
Is 900-63-9-0102-03 still available?
900-63-9-0102-03 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 900-63-9-0102-03

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026